Recent content by KDean

I resolved the issue. Just had to go in and select the ink configuration for the machine and it went away. From what I’ve gathered head wash deletes out your current ink configuration and is waiting on you (user) to tell it what it is.

Did you ever resolve this issue?

I bought a JFX200 EX last September and had the same issue our tech/ installer made notes on the install paper work he sent back to Mimaki. He came back in July and replaced the white/clear printhead and it is printing perfectly now.

Yes 8'x4' sheets. If I am remembering correctly LUS-120 ink was much cheaper than the LUS-150 and was originally what I wanted to use but the Mimaki company rep and my sales rep both talked me into the LUS-150 due to the flexibility of the ink. At the time I didn't think I would need a flexible...

I run a JFX EX with LUS-150 ink. I haven't had any adhesion issue on coro and can turn a sheet in around 7ish minutes at 300x450. It's definitely not the fastest but it gets the job done and for us the price point was very attractive.

I am needing some help on doing a head soak on the VG and all I can find are videos on the VersaCamm. The biggest question I’ve got is if I am supposed to pinch the waste ink line. I am assuming so but wanted to check on here before doing so. I have ran several powerful cleans and done several...

I had a friend that had the same issue and I had him do a good cleaning on it and it went away. Otherwise it could be cross contamination

I have the RS welder not a fan will be replacing it very soon with likely a Hemtek