Recent content by Slody4Futbol

I pinched off the tube just before the pump where they Y together into one, soaked the caps in cleaning solution. Once the machine parked the printheads and the caps pressed up to the heads I let it sit over night. Just did a cleaning, another test print, exact same thing. I'm so frustrated...

So, when I went to use my cleaning kit I started looking around inside the machine, I noticed that the capping station wasn't seating up evently with the printheads. So after reading through the manuals I aligned the carriage over the station, and NOW I have a good yellow test print. It was...

My cleaning kit arrived yesterday, however I noticed the capping station wouldn't press evenly against the heads? The one that it does press up against has the good test print. Attached a pic. Was in a rush yesterday so I can get better pics today.

Hi, I recently purchased a used SP300V that is fully running and had lots of parts replaced. Finally got some profiles on that helped with the issues I was having at first, however, I'm seeing light banding. I did a test print *attached* I'm hoping a good cleaning will help? This is my first...

I'm still weighing all possible options. I don't even know about other brands. Roland is all I'm familiar with right now. What are you looking for and where are you located?

Hi everyone! I'm new to the site and I've been dealing with my Roland GX24 doing vinyl plotting for about 1.5-2 years now. Mostly for sports jerseys, tshirts, and stickers. I'm looking for a dependable machine to upgrade to but not sure what my options are. I've looked at the Roland BN20 and...