• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Search results

  1. Are you an Experienced User that owns a Roland LEC-330 with CMYK+Gloss+White ECO-UV4 Inks installed?

    Are you an Experienced User that owns a Roland LEC-330 with CMYK+Gloss+White ECO-UV4 Inks installed? Hi I recently purchased a Roland LEC-330 from someone that didn’t know much about the machine and have some questions that I would like to ask you if you could PM me or send me a text message to...
  2. Flushing Position Adjustment for Roland VS-540i ink dripping out of left side of capping station

    I tried a flushing position adjustment in service mode but I notice there is ink now dripping out of the left side of capping station after cleanings (picture1). So when I did the flushing position adjustment it says to press the ENTER key when the arm part of cap unit starts to move which I did...
  3. Roland VS-540i Test Print Colors Order

    Trying to find out which order the colors of the Test Print are in for a Roland VS-540i so I can find out which color is missing nozzles to flush with cleaning solution. Looking closely at my test print I think the Color Order is Light Black, Cyan, Magenta, Yellow, Black, Light Magenta and...
  4. How to change VP-540 IC Cartridge Sensor (Reader) inside Slot

    I have a VP-540 that has 2 broken IC Cartridge Sensors inside Slot 3 and Slot 4 of the Ink Cartridge Slots. I attached a picture of the sensors that I need to replace. There is no manual on how to change them out and just need some pointers on what to take off first so I can get the sensors...
  5. VP-540 Printhead Streaking Lines

    I purchased a DX2 printhead for my Roland VP-540 less than a month ago and prints streaking horizontal lines across the media for one of the colors (the black printhead). I have attached a picture showing the streaking horizontal lines that happen during printing. I also replaced the head cables...
  6. Roland CJ-500 Motor Error only when cutting

    Hi, I have a Roland CJ-500 that won't cut anything only prints. When I do a demo print it works fine but when I try a Demo Cut the cutting carriage starts and then immediately stops because of a motor error which doesn't throw any code or anything (just says motor error). I also reset the Motor...
  7. How to import Flexi 8.1 ICC Profiles into NEW Flexi 12?

    I use Flexisign-Pro 8.1 with custom made ICC profiles for my solvent converted Roland CJ-500 Printer and everything works perfectly except I can’t upgrade to the new Flexi 12. So who knows how to import Flexisign 8.1 ICC profiles into Flexi 12? What changed since then with there ICC Profile...
  8. Need Help Black Ink Drops Out Slightly While Printing (Damper Problem?)

    If black ink is slightly dropping out while printing but the test patterns are perfect would you say it is because of the dampers? How often should I change Roland VP-540 dampers? I just replaced the Wipers and Caps are all new. Here is the pictures of an image I printed in versaworks with...
  9. Roland VP-540 Printer Carriage Going to Far Right while Printing —>

    I sent my Roland VP-540 mainboard in for service but when I got my mainboard back and everything is working now except I can’t figure out why the printer carriage is going to far to the right and is lightly hitting the capping station and making a hitting noise at every pass during printing...
  10. VP-540 Loses Power in VersaWorks when sending job from RIP to Print

    Hi I’m trying to find out if it’s the main board causing a power loss when sending job to printer because it turns on, does cleanings, even prints reports and does test prints to check nozzles but when I send a job from VersaWorks to the printer it just shuts off as soon as it goes from rip to...
  11. Centering the Heads and Caps Roland SP-540V

    I'm having trouble centering the print heads and cap tops of my Roland SP-540V. How can I tell the caps are centered? It took me so many times to get the heads centered but now I think my caps aren't centered because the bottom portion of one of the heads is not being cleaned. I see how to...
  12. ROLAND SC-500 ARMS (Automatic Registration Mark System)

    Hi, I purchased a Roland SC-500 and I'm trying to print, laminate and cut decals but can't find the directions on how to automatically register the crop marks after I unloaded the media then laminated and then loaded the media back into the printer. The only option I found is a manual crop mark...
  13. Print Carriage Stops Moving Part Way Down The Track

    I have a Roland SC-500 that gives a motor error because the print carriage stops moving part way down the track when printing but when I use the SC-500 as a vinyl cutter it works fine. If I turn off the power and manually push the print carriage with the cutting carriage together down the track...
  14. How to do a cleaning Cycle on my Roland CJ-500 online

    Is there a way to do a cleaning cycle from within Windows or Roland ColorChoice or FlexiSIGN? I have my Roland CJ-500 setup online but can't figure out how to do a cleaning cycle if I'm not in front of the printer and by actually pressing the cleaning button on the printer.
  15. Compatible CJ 500 Media Holder or selling non working CJ 500 for parts?

    I recently purchased a CJ-500 that is missing the Media Holder Shafts that the Rolls sit on but I would like to find a newer & better compatible Media holder than the CJ 500 had originally or if someone wants to sell their CJ 500 for parts only. Contact me at: Anthony Sansone...
  16. FJ-50 Moving Media Forward and Reverse Stopped Working

    Hi Everbody, I have a Roland FJ-50 I might have put too much weight on the media rollers because I used a really big and heavy roll of banner material and now my printer won't move the media forward or in reverse. I don't get any error message and the printer still even prints but only one line...
  17. Looking for Parts (Roland FJ-52)

    Hi does anybody know where to find some new cap tops and a sheet cutting blade for a Roland FJ-52? I can only find DX4 cap tops and they don't work with DX2 print heads right? I'm not sure if one of the cap tops are causing this but I keep getting about an inch thick slightly faded line every...
  18. Parts for Roland FJ-50 Printer Needed

    I was cleaning my Roland FJ-50 print heads in some flush liquid a couple months ago when I was in a hurry and not thinking about it I plugged the print heads back in before they completely dried out and went to print something and can you believe sparks fly out of one of the print heads and...
  19. Anybody have a Roland FJ-50 Main Board for Sale?

    Anybody have a Roland FJ-50 Main Board for Sale? sales@graphicsphere.net
Top