flatbed

For context, we use a Fuji Acuity Prime 20 printer with UV inks on white ACB (CMYK only), together with PrintFactory RIP software. I have no formal education in printing, though I did follow a couple color calibration courses from our printer supplier. A problem we've had for a long time is...

Hello Folks, I've recently been looking into purchasing a flatbed cutter for my sign / print shop. I'm looking for something that can manage at least 4'x8' sheets of material (aluminum composite, posters, banners, etc.), but the prices machines like the SUMMA and ZUND are way out of budget. I'm...

2020 Summa F1612 with a bunch of upgrades for sale. The machine has served us well over the past two years. Everything is in working order and currently in operation. Included: -2 x tangential module -2 x kiss cut tool -1 x drag knife/pen module -Modified pen tool so you can use any Staedler...

Hello, I’m new here. I have hybrid (Lintor GUV16) and I’M looking forward to upgrading my hybrid to new flatbed. I’m most interested in Vutec efi and Agfa annapurna flatbeds. I want to ask if someone here owns this printers and if it safe to use ink alternatives. I want to also ask if will lose...

We moved our HP 750 printer to a new warehouse. We did our best to level the printer when setting the printer up at it's new spot. I am getting pretty bad print quality. It looks like printheads 1, 2, 3, and 12 are the worst out of the bunch. What I have tried - Auto and Manual BiDi...

Hi there, we are laserengravers / lasercutters that mainly do acrylic items. We now want to expand to UV led for our items, but we have no experience in this (even though we are fast learners and tech savvy ;) ). Our research narrowed our needs down to these 2 machines: Mimaki UJF-6042MKII and...

Hi there, I have a 2020 Summa F1612 with a bunch of upgrades for sale. We are purchasing a Zund. The machine has served us well the past two years but looking for continued workflow improvement so decided to go with a Zund S3. Everything is in working order and currently in operation. Here are...

we are looking into purchasing a Canon Arizona 135GT UV flatbed printer. We are likely going to add the roll to roll option, so we can open doors to some different options that our HP Latex can't currently do. We are wondering if we would potentially be able to print onto fabric with the...

Hey all, We're seriously considering adding a medium-format UV-flatbed printer to our arsenal. We would like something that can accommodate coroplast signs that are 28"x44". This is about the largest size that we would like to print DTS in-house. We have been comparing a few different models...

I have an Oce 318 that starts printing a dark blue color fine and then after about 5 inches just starts to get worse. Any sugestions on how to fix? Filters look good.

I am looking into the Arizona Oce 460GT flatbed printer and wanted to know what these are going for in a used, fairly good quality condition? Does anyone know what the value of this printer is going for since it is from like 2013?

Hi, Been having trouble with my flatbed. I was getting carriage motion failures back to back, changed the motor and the encoder strip. Now I just keep getting error W-SS-4 after air purge. Any thoughts ?? There is no other error code displayed other than this

I’m looking to buy a flatbed but our building only has a 5ft doorway. Is there a machine that can fit through a 5ft doorway in pieces or crated?

I am looking for UV Flatbed printing services for golf ball customization in the Long Island / NYC metro area. I am trying to test a product concept so I need a supplier with a UV printer on site. In researching golf ball customization, I've found that a flexible UV ink and primer are required...

JFX200-2513. I am having problems with the white ink. It is creating almost like a mist, deflection, or shadows to our prints. I have replaced the white ink filters, put in new white ink. I changed the head gap to 1.5mm, I have done all the digital alignments. Have adjusted the head voltage. We...

I use a Scitex FB750 with Onyx rip software. I'm trying to figure out how to underflood only a portion of an image. I've attached a screenshot of the file I'm trying to accomplish this with. The portion outlined in red has a solid spot color behind it. I need that to underflood, but I need the...

I'm trying to print a very detailed CAD drawing on a Canon Arizona 1360 flatbed using the roll media option. The paper roll is 36" wide. The plan's very detailed and I need to use a high quality setting. I resized it to 35.80 so it won't spill off the edge of the paper if it's not perfectly...

Hey guys, I'm looking for a little guidance here. We got a JFX200 a few months ago, and ever since we haven't been able to get consistent prints on the bed. When we do a head height check across the bed, it's all over the place. I've had multiple techs in from the distributor we purchased it...

I recently got a hold of a Graphtec FC4500-50 flatbed. So far, so good & I'm getting a hang of the machine and menus. It's clearly showing its age, but it all makes sense somehow and the machine does the job. I ran into an issue & I have a question that someone here might be able to answer...

Hey all. I am selling our Digitech Retrojet. We purchased this machine about 2 years ago and it is a total work horse. This machine prints beautifully up to a 5’x10’ panel. 4’x8’ prints in just under 3 minutes We are selling to upgrade to the Digitec Tru-Fire 1 minute per board $350k machine...