• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

print head

  1. Disable 1 print head - Roland XR-640 Soljet Pro 4

    I'm wondering if there is a way to print using only 1 of the 2 print heads (A & B) on our XR-640. We've got a bad head (B) and are working on budgets to get it replaced, but it would be really awesome if we could limp along on 1 head for the time being. We can do this on our Epson S80600. I've...
  2. Mutoh valuejet 1324x ink dropout? (please help)

    Hello signs101 guru's, im having very odd problems with my mutoh valuejet 1324x. i was having 1 in streaks of pink/magenta at the start of my prints and pretty bad banding (pic with the pink and banding) i ended up switching out the dampers and maintenance station. the problem persisted...
  3. VP 300i - Potential Dead Fuse?

    Hey guys! So recently I was doing some maintenance on my VP300I as one of the manifolds for the head were broken on the damper for yellow. Like a idiot, I disconnected the ribbon cables to the head while the machine was still "On" it was in sleep but it went right over my head to properly turn...
  4. Gerber Edge Printhead Needed

    We have a Gerber Edge FX with a printhead pixel starting to go out. We have had this problem with an Edge, Edge II and with the Edge FX about 3-4 times in the past 12 years and I have always been able to avoid the absurd (to me at least) process and expense for buying one from Gerber. Between...
  5. Need Help Roland sp540i New Printhead Alignment Issues & Bad Capping

    Hello all in a bit of trouble with my sp540i. Long story short I starved the MY channels when installing new cartridges and after breaking the manifold nipple when pulling some ink through I got it working again for then the CK channels went bad overnight, got worse and then nothing thereafter...
  6. Sp540i Test print no Cyan

    I changec caps and dampers, but in the test print there ir no cyan. Does someone knows something about it?
  7. Roland sp 300-v

    So I recently purchase a used Roland sp300-v in great condition. So here where things get interesting. It keeps printing streaks in the design. I did a powerful wash then a head soak didn’t improve the conditions. So in the test print magenta was missing a lot of lines I’ll try to upload it...
  8. Suggestions Where I can get a Roland 540i VS print head at a reasonable price

    Does anyone know where I can get a Roland 540i VS print head at a reasonable price?
  9. Need Help Horizontal Issues HP l25500

    I'm a newbie to the printing world. I purchased an HP l25500 to give us a feel as to if we should commit to having a wide format printer. The machine works fine but for some reason I'm getting horizontal banding on my prints. I did a few print head cleanings, and it has helped but I think I...
  10. Roland SC545ex will versa-works tell me the ser. no. of print-head?

    Hi all I have a Roland SC545ex I purchased with clogged dx4 heads. I cleaned the heads with a sonic cleaner using Branson EC Electronic Solution (circuit card sonic cleaning solution). Although it seems it was a success, the ser. no. was cleaned off. Will versa-works tell me the ser. no. of the...
  11. Where do you purchase your print heads from?

    Hi all, So I am in the market for a new print head for my unicorn VJ-1618. The manual has a part number of DG-41914 (eco solvent). I can google as good as the next guy but some listings say "Mutoh VJ-1618 1624 1638 Printhead" but I know they are different; in addition its a month shipping. To...
  12. Need Help Roland XC-540 - 3 of 6 print heads not printing at all

    I have a strange issue with my xc-540. It's been sitting for a while unfortunately, maybe a year. It's been plugged in and every few months I do a full manual cleaning. Here's the issue: I'm trying to prepare it to sell but I need everything up and running. 3 out of 6 of my print heads I...
  13. Need Help Roland VS 540 not starting up after printhead change

    problem solved, sorry - just cant delete the thread...
  14. Need Help Roland XC-540 Magenta & Cyan not printing.

    Hi Guys I have been having endless issues with my xc-540 this week firstly I kept getting sheet set error finally after a few days changing different things I changed the sensor and it worked fine however my issue is now I am not getting and Magenta or Cyan after multiple cleans etc nothing...
  15. 1624 Head Replacement

    Hello all - Looks like we have lost almost a full black ink channel in one of our 1624's. Has anyone here replaced a head by themselves before - and do you think this is what needs to be done? We just put in a new maintenance station around a month ago. Nozzle check comes back great with the...
  16. Problem FTA Epson the print head error occurs

    My Xuli X6 with Epson Dx5 print head is showing "FTA Epson the print head error occurs" anyone have an idea of what the problem is?
  17. roland dx7 print head

    i need rolalnd solojet XF 640 print head ( DX7 ) some one know about suppler just inform me email : shafissit@gmail.com thanks
  18. VS540 Colours Mixing Inside Print Head

    Morning! I have attached a test print. Does anyone know the cause of this? Thought it might be the cap top so I changed the cap top for a lightly used one I had lying around. I made sure the lines to the pump are clear, did a manual clean and a couple of medium cleans. It cleared up a little...
  19. Need Help Mimaki CJV-30-60 Noobie problems, lot's of sheet jamming etc

    Hello, I recently purchased the Mimaki CJV-30-60 primarily for T Shirt Vinyls and small stickers. I bought this exactly one month after buying the Roland SP540v which was my first ever printer/cutter. It was the first time I ever had any experience with a printer cutter combo. Now being very...
  20. Need Help Mimaki CJV30 - Print head troubleshooting...(solved)

    Hi, After cleaning and flushing the print head with Mimaki cleaning fluid and a syringe, the CJV30 won't print at all. So before I order a new print head, I just wanna be sure that the print head is the problem, and that its not a initial set up problem after removal or some connection issues...
Top