troubleshooting

Hello friends, So long story short a client has come to me with a logo designed by someone else who has since gotten out of the business and hes looking for shirts done in multiple colors. So my issue is I took over this business and they were exclusively using LXI for everything, I very...

Please help. The white ink is not printing solid. I did the test print and did nozzle recovery but still not printing all the lines. (See picture) Resulting in very visible lines in the artwork. But this only happen to the prints on darker material that require white plate underneath. There's no...

Hello everyone, I have a question about my RSC 6500H laminator with heat assist. We've been running it cold for awhile now and I was curious to try and use the heat assist elements. The heat coil as already been installed into the top roller but when I select Heat on my control panel the...

Laminator: Royal Sovereign RSL-2702, about 3 years old Can anyone tell me why this is happening? I'm laminating cardstock pages of an emergency checklist binder with a kind of thick 5mil laminate. Normally I run everything fine at 248 degrees (F) and on speed 5. Well, none of the 40 or so...

I have a strange issue with my xc-540. It's been sitting for a while unfortunately, maybe a year. It's been plugged in and every few months I do a full manual cleaning. Here's the issue: I'm trying to prepare it to sell but I need everything up and running. 3 out of 6 of my print heads I...

Hey everyone, I have been troubleshooting, repairing, and replacing parts on our SP300V for about 2 weeks and I'm to a point where I'm stuck. 1. Originally our black (K) stopped printing completely, and I noticed that the manifold for the print head had somehow snapped so ink suction wasn't...

I received a Mutoh VJ1204 large format printer for free, knowing that it was 'broken'. Previous owners didn't want to pay to have it fixed so I figured since I had some technical knowledge, I'd be able to work on it in my spare time. The error I get is "E068: CR Encoder" Knowing that this had...

Hello there. I am experiencing severe problems with connecting my Roland printer. (I have a Roland Soljet Pro III XC-540 printer) which I have been running for many years without problem. Now, for probably the first time, I have encountered a grave issue which I do not how to resolve. First...

Hello! I'm having issues with my Mutoh 1624x printer not printing the correct size. Right now I'm trying to print corn hole board wraps so I need the print to be 48x24 on the dot. I just printed a set and they seem to come up short on the vertical end. I've tried messing with the size...

Hi, I want to learn how to weld PVC tarp to a high quality. You can buy these Banner Welder Price - Buy Banner Welder,Heat Jointer Machine,Hot Wedge Welder Product on Alibaba.com everywhere it seems for about 380$ but I got one of these second hand as is. I've lurked through the various...

Does anyone have any ideas or possible causes/solutions? Seemingly at random, the printer will suddenly not start printing when we send a print file from our PhotoPRINT SE Mutoh Edition 6.1v2 printer rip. In order to fix this, we then shut down the printer and plug it for about 30 minutes. We...

Hello. :) We've been using Corel Designer X-6 for a while now, probably at least two years, maybe three and the program never ceases to amaze me with how unstable and buggy it is. I'm running it on Windows 8.1 via Parallels on my Mac and our draftsman runs it on his PC on Windows...10? Maybe 8...

Attached is a picture of my first real issue that I am unable to address myself. I haven't come across any pictures that look similar to the white large horizontal banding type issue that I am having. I am running flexi 12 and attached are screenshots of my settings. I cleaned the encoder and...

The motion controller is dead on my Gandi, and this has happened a couple years ago, I remember replacing a fuse and the problem was solved, I am hoping that is the case again, but I do not remember which fuse to look at. and I think our service tech. is on vacation, does anyone know how I can...

Concerning Roland SolJet XC-540 Lately we have had problems with the magenta and light cyan ink levels reporting zero in VersaWorks. It's not affecting the prints, but we have had issues with both of those heads (replaced dampers, captops and cleaned heads as per tech guys advice). Anyone else...

Hi All, I replaced a print head on on of my Mimaki UJF-6042 printers today. The print head that was removed had significant clogs in the nozzles, and was affecting the colors of my prints. The nozzle recover function was enough to get me by for awhile, until today. Anyways, I replaced the...

We printed four panels (roughly 28" wide & 84" tall) of Kapco 12 Mil Blockout film on our Epson GS6000 printer, they were laminated the next day with 10 mil textured laminate. I gave a quarter inch bleed to the four panels and added crop marks where the cut should be to fit the frame. When the...

Hello all Mutoh experts. We have a confusing problem with one of our valuejets 1604. A few seconds after powering on it displays "E075Err Head Cable Error" We have done the obvious and changed Head Cable, Carriage Cable, carriage board, Print head, Main board, and checked all the connections on...

Hi guys. I just bought a used (almost new) CE5000-60. Have set it up, followed all instructions, but it still cuts HORRIBLY bad! I have posted 2 pics of my problem, that i cant seem to come past. I cut with original settings, and i use Signtcut pro as software with no altered settings. Do...

Hi all, currently having some issues with our VS-640. Doing some truck lettering and some of the letters aren't fully cut, mostly things like a G or R, letters that are a little more "complex" than say an L or an O. Another issue I'm having is that sometimes when I check off "Cut Image...