wrap advice

Had a customer come in today and he indicated that he had purchased this material on Amazon and wants us to install it. I have never heard of it, don't know anything about it and I am wondering what type of product it is. Looked it up on Amazon, saw some reviews and videos. It looks like it...

HI, So I am getting into wraps on small areas... How would you go about installing a bottom wrap on this door with sharp body lines? I have done one before with a hinge install to the right but that came out okay but not perfect. How would you go about installing this? Material 3M IJ...

Forgive me guys, I searched through the forums and found individual posts but nothing cohesive on the subject so I just want to make sure I've got my bases covered before we try this... We've got a very particular client who wants to match the plastic panels on a bunch of Ford Transit Medium...

Hey All, I have a customer with a backlit monument sign that has PVC posts on the outside. He wants to change the color and I know paint is so tricky to get adhesion that its probably not an option. My question is has anyone had any experience with using Vinyl or Wrap material over PVC sign...

we have this problem during the installation process where the overlaminate begins coming apart from the vinyl. Using Avery supercast kit. Any ideas?

Hello all, and thank you in advance for all the suggestions. I have been studying car wraps, and am quite comfortable on how to design the wraps. I am running into problems moving on to the next stage - printing from my design files. I have a Roland VG-540, and usually convert my files to pdf...

Hello All, Just recently joined with this forum. Am a fairly new yet quickly growing sign business in Houston. I have always been interested in Vehicle Wraps, but am slightly unsure of the process. I would be using 3M IJ-180CV3 for the wrap and then printing on it. My concern is in the...

I've tossed the idea around for awhile and have decided its something I would like to fully pursue. There is so much I have to learn etc. So any helpful advice and suggestions are greatly appreciated. I am wanting to get started with car wraps. Regular vehicle wraps and also dirt tracks race car...

Okay, I need some help. The customer wants their Pro-Master to look just like this and the customer gets what the customer wants. My issue with it is that when I design it the part that I would print exceeds 54" so I can't print in one piece. I could print it in sections but I fear like it'll...

I am doing a wrap in Supreme wrap film. I am rolling around the edges of the door skins, should i be sealing the edges after post heating? Using Matte grey. Thanks

Wondering if I can get some recommendations! We want to wrap our company pickup, and the color of the truck is white. We haven't done a full color change wrap before, and so I'm wondering if anyone can tell me what they do where the truck bed and the cab meet. If I wrap the truck in any color...

I am printing on a HP Latex 360, using a Royal Soverign Laminator with heat assist. I have a client with a 53' (box) semi-trailer with rivets. What is the most cost effective/labor effective materials to use. I would default to using Avery MPI 1105 EZRS with DOL 1060 Overlam, but I am thinking...

Hi I'm having trouble with the rear quarter panels they raise up and dip then raise up again.. has anyone done a perfect wrap without cuts on this area and no lifting? Or is it impossible?