Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ratings 2CT Media has received

  1. bannertime rated 2CT Media's post Like in the thread Discussion I've owned an HP R1000 since April 2019, ask me anything.

    You said ask you anything

    Feb 28, 2020 at 11:06 AM
  2. Ldireprophil rated 2CT Media's post Like in the thread Roll laminators vs flatbed.

    Yes you need both if you need to laminate long runs of roll stock.

    Feb 26, 2020 at 10:21 PM
  3. Ldireprophil rated 2CT Media's post Like in the thread Roll laminators vs flatbed.

    This comes down to the same concept of hybrid vs true flatbed. For mounting panels or laminating rigid stock a flatbed applicator is...

    Feb 26, 2020 at 10:21 PM
  4. Jeremiah rated 2CT Media's post Like in the thread How would you Remove?.

    I would tell them it will have to be stripped and repainted if he wants it to look right. If they want to move forward and are not...

    Feb 25, 2020 at 3:49 PM
  5. Steven 54 rated 2CT Media's post Like in the thread Frank Fellers, the Owner of Fellers Has started his own wrap shop doing wraps for $1,000.

    Does it even matter? Even if it goes Nationwide, there are lots of other successful paint shops even with Earl Scheib and Maaco. What it...

    Feb 24, 2020 at 11:11 PM
  6. ColoPrinthead rated 2CT Media's post Like in the thread Roll laminators vs flatbed.

    Yes you need both if you need to laminate long runs of roll stock.

    Feb 24, 2020 at 12:45 PM
  7. zspace rated 2CT Media's post Like in the thread Need Help Colordao 1650 - Who has one and does wraps?.

    It's 2.5 times faster than our 570s in a like for like print quality. We literally run everything on the Colorado now and only wraps and...

    Feb 23, 2020 at 8:25 PM
  8. decalman rated 2CT Media's post Like in the thread Frank Fellers, the Owner of Fellers Has started his own wrap shop doing wraps for $1,000.

    That's all color change in AZ.

    Feb 23, 2020 at 8:24 AM
  9. Pixels Are Bad Mmmkay? rated 2CT Media's post Like in the thread 6mm ACM or 5mm AlumaCorr?.

    It comes down to an old engineering idea, is solid stronger than an arch? In your case both would work suitably

    Feb 21, 2020
  10. Jburns rated 2CT Media's post Like in the thread Frank Fellers, the Owner of Fellers Has started his own wrap shop doing wraps for $1,000.

    That's all color change in AZ.

    Feb 21, 2020
  11. Jburns rated 2CT Media's post Like in the thread Frank Fellers, the Owner of Fellers Has started his own wrap shop doing wraps for $1,000.

    Does it even matter? Even if it goes Nationwide, there are lots of other successful paint shops even with Earl Scheib and Maaco. What it...

    Feb 19, 2020
  12. premiercolour rated 2CT Media's post Like in the thread OH Wholesale Sticker Pricing.

    Dude, you gotta be a MM on here to post your ads. Also your website has watermarked images.

    Feb 18, 2020
  13. bannertime rated 2CT Media's post Like in the thread OH Wholesale Sticker Pricing.

    Dude, you gotta be a MM on here to post your ads. Also your website has watermarked images.

    Feb 18, 2020
  14. Marshallmax rated 2CT Media's post Like in the thread OH Wholesale Sticker Pricing.

    Dude, you gotta be a MM on here to post your ads. Also your website has watermarked images.

    Feb 17, 2020
  15. Jburns rated 2CT Media's post Like in the thread Question What Equipment Do I Need for This.

    I would run that as 3 layer rowmark, and then adhesive back it. You can do it all with 1 machine (CO2 Laser) and it's damn near permanent.

    Feb 16, 2020
  16. Marshallmax rated 2CT Media's post Like in the thread Suggestions Die-cutting low volume magnets.

    NewLife magnetics is what we use. You are looking at purely the hold strength, the .020 magnet is also almost half the weight and much...

    Feb 14, 2020
  17. AMGearhart rated 2CT Media's post Like in the thread Nifty Tip: Ask your customers for Google reviews.

    Why don't you post the lower than 5 star reviews? I ask because this is a debate we are currently having, I believe we should address it...

    Feb 13, 2020
  18. johnnysigns rated 2CT Media's post Like in the thread Routing underlayment.

    Call Sutherland Felt And order the Blue Tuff-Cut Mat... It's better than anything else out there. Low cost, durable, and high vacuum flow.

    Feb 10, 2020
  19. Gino rated 2CT Media's post Like in the thread Need custom cut shape sign blanks.

    For small volume check out a shaper origin. For around $6000 you can cut practically anything.

    Feb 10, 2020
  20. tudouqiezi rated 2CT Media's post Like in the thread Question What Printer would you stake your business on?.

    This is the file we were printing. Just black and white but significantly faster and the black density higher on the Colorado

    Feb 5, 2020

 


Loading...