Recent content by 303DC

Thank you! I considered trying to do the kiss cut with the blade in spot #2 so it's not against the teflon strip, but then I would have to strategically place my pinch rollers. I think that MIGHT work, though, come to think of it. Hmmm.

Hello! I've been wondering lately about a certain type of sticker I'm looking to offer to customers. When I do pop-out stickers, I usually set a border of about 1/4" for the perf cut, then the normal kiss cut. This leaves a 1/4" of scrap to weed, and leaves a white liner border on the finished...

Hello! I've been wondering lately about a certain type of sticker I'm looking to offer to customers. When I do pop-out stickers, I usually set a border of about 1/4" for the perf cut, then the normal kiss cut. This leaves a 1/4" of scrap to weed, and leaves a white liner border on the...

Hello, can anyone please recommend a good pearl white calendared film that will weed cleanly? I have an order for stickers that will have some finer lettering that weeds well with Oracal 651, but will almost certainly not weed cleanly on a cast wrapping film, which I know has many pearls...

I understand that it should - but it does not.

I keep getting an error that I need to update my personal details. However, everything is filled in that's required... what gives?

Thas' pretty neat.

Thanks to both of you. Those may work. It's only for a temporary building relocation/"we moved" sign, so it shouldn't be necessary to have super high clarity.

Hello, I need to make a large sign for a customer which will need to include a map. I am hitting an absolute dead end trying to find any way to create a high-res map using Google Maps or MapQuest. Any guidance would be greatly appreciated! Thanks!

Thanks for the insightful response. :noway:

I can't find any obstructions anywhere. Keep in mind a tech was out here, and that this happens consistently at around 15-20'. An obstruction would imply to me that this would happen immediately, no? I clean and lubricate BOTH rails minimum of once a month, sometimes bi-weekly.

As embarrassing as this is to admit, I'm not sure what you are referring to, but I would be very interested in knowing! Something I failed to mention is that RIGHT before it fails and this happens, the printer makes a loud thumping noise before the carriage assembly makes a pass. It'll do this...

I will double check when I get back to the office, but I believe it was 86:01.

Bump for a question to anyone reading that may know... could having my vacuum max'd out cause this? I would think if that was the case, it would happen almost right away rather than 15-20' in to printing, no?

Hello all. This damn printer... I'm about to light it on fire. Last spring when I was printing my first wrap on it, it would shut down about 15-18' in to a 20-25' job (full width). The first panel would print fine, but the second one would fail. This happened while it was still under...