• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by AARON_INK.

  1. Envision plotter not cutting after edge printing?

    Thanks Fred, do you know of any other test I could preform to make sure about a bad carriage? Guess its going to be a bummer, I just bought this set up used and got a great deal on it 2500.00 printer plotter and software.

  2. Envision plotter not cutting after edge printing?

    Hello I did a search first to see if there was and answer to my problem but did not find anything. I have an edge 2 with an envision plotter with omgea 2.0 software. I had a job to print/cut yesterday it was a label that would be printed then cut to print on the plotter the first size was 24"...

  3. Experience Routing Gatorboard?

    Try a straight or down flute tool. I have cut this before but it been a while. Also use a new or sharp tool. Run the speed at about 100 IPM or so. You know your machine play with it and you should get go results. Sharp tool is key and what ever you do, do not use spiral up tool it will rip up...

  4. Art path .PLT to Enroute?

    Do you still have Gerber's Omega installed? If you do, open the .RTP or .PLT in composer and then export the file as a EPS and bring it in to Enroute. Aaron

  5. Routing/painting mask material issues

    Great questions and answers been routing and painting for years and have always wanted to try masking then routing but have been afraid of it.I usually just prime real well then rout and do the finishing by hand. How well does the mask hold up on profile cuts? (Oracal mask) Thanks

  6. replacing sacrificial boards on a 408?

    Yeah I made that mistake! I stripped the mats off which is pretty easy but then you have the double stick tape. What happens is that the mats come up then the layer of plastic stays on the table and under that you have adhesive you have to get off. very big pain! I used a couple of methods tried...

  7. Router software

    ArtCam has what they call artspool that comes with ArtCam. It drips the info into the controller. You have to save the toolpath out of ArtCam as the Gerber format then open artspool and send to the controller. Check it out ArtCam is great but expensive. AT

  8. Oracal palette files????

    Sweet thanks for the link! Aaron

  9. what is the cost to go 3D

    ArtCam is great but very exspensive. I run a Gerber Sabre with artcam and just bought a MultiCam. Sabre's are nice but gerbers software sucks. The Sabre is very accurate for 3D work. ArtCam Pro is about 8000.00 and training about 1000.00 more. I did not need training and if your familiar with...

  10. CNC Routers . . . Best Value with Performance

    CNCrouterstore.com is great! I just bought a MultiCam from Kevin over there and it was a great buy. I might have a Gerber Sabre 4x4 (true cutting area 54"x54") for sale. If this is something your interested in hit me up! Aaron
See more
Top