Recent content by agencealoha

here 's some news ! prob fix ! No need to try the servoboard, as i can feel the run of the carriage in my hand, it was definitively the bearing blocks... and fortunately i got 2 old sp540v with the same bearing blocks...so i swope it and it works ! thank you anymay Damon (you were right !) for...

ok that's kind i 'll check the servoboard first (easier to remove than the bearing blocks)

Thanks damon ok i will try for the bearing blocks, is it difficult to change them ?, is someone got a tutorial for this ? also a technician is going to lend me a servoboard like that i could try without losing money to be sure... i will let you know about these 2 solutions

Hello all got this trouble, test print is good but when i send a job, the printer start to print and after a few goings and comings it stop with the scan motor error 0090 0080 warning... i did the limit initialisation (ok) i did the encoder strip (ok) so in the service note the code refer to an...

Hello some news.. i've done what you said both of you, and for the moment after 1 month it still working... good day

No Jim, done nothing in the print head cavity, but i will take a look on it... ok i will do these 2 things : head soak and reseat the ribbon cables and i will let you know about the advancement thanks you to you both guys

All right, so i'm going to do this and i 'll let you know... anyway that's the last thing to do i guess before thinking of the head's dead ? thanks to you

thanks for your quick reply... but i checked already the bottom and nothing left there, it's totally clear...also i can insure that maintenance parts are all good and clean what do you mean by deflecting nozzle ? what's the thing that could make this happen ? i hope it's not the head starting...

Hi everyone, i need help with my Roland SP540, since a few days, i got horizontal line across the vinyl when printing (you can have a look on the attached image) and this can appear right after starting or after printing 50 cm, or none, or more and less... test print is really good, encoder...