Recent content by Aireana

Appreciate the feedback, thanks!

I'm looking for recommendations for a printable, low tack self-adhesive vinyl. We have been using Orafol Orajet 3621 3mil, but it seems to be stickier than regular vinyl. We are having issues with it peeling up vinyl/paint that is underneath.

Thank you!!

Hi all, I am trying to find the font that was used for a 1967-1968 327 Turbo-Fire 350HP air cleaner decal. Do any of you know what it is or can you point me in the right direction? Thanks, Aireana

Thank you for the recommendations!

The take-up reel lever on my HP Latex 560 printer snapped off. Photo attached. Does anyone know where I can get the replacement part for this or a part number? Hoping I do not have to replace the whole take-up reel. Thanks!

I have an HP Latex 560 and was in the middle of printing banners when the printer threw the error 48.03 (Wiper-roller error) and stopped printing. According to the troubleshooting guide, it states that if the problem persists to reduce the back tension of the substrate, from the front panel...

Thanks for the tip! I will see if the printheads are the issue.

Yes, I did color calibration and created a new ICC. Printheads, a lot but they are still in good condition.

I am starting to think that there is not much I can do at this point. Duratex seems to look like a more dull white compared to the bright white of Forward.

Yes, I got basically the same results. Also, if I use the Forward banner profile I have to print at 16 pass.

I have an HP Latex 560 printer with Onyx 18 RIP Postershop. The Forward Brand banner (PVC) that we have always used in the past is now discontinued. We were told to use Duratex 13oz Forward PVC banner instead. I used the last of the Forward banner for a project and need to finish the rest with...

Thank you!

Working on a truck design with all vector elements in Illustrator. There are two different versions, both have bubbles in the artwork. I did a quick sample print of both, but the bubbles only show up in one of the designs. Attached are screenshots of what they are supposed to look like and what...

Bubble art in Illustrator, how it is supposed to look when printed.