Recent content by Alan Foster

this is a question for anyone in the UK that knows of a supplier to supply mirror rose gold ali-composite or anothe material that will work for long term outside use thanks Alan

hello thanks for replying, i managed to get it sorted, i searched and searched for the software or anything about it and i came across dobosan letter benders and there A130 model seemd to be using the same software. after speaking to a guy in argentina that deals with dobosan, he sent me an...

Yes thank you for translation

Hello hopefully someone might be able to help. has anyone imported a letter bender from china using the ADT-ver2.3.4 Manual control software, we are trying to find tutorials for it or information, the seller in China isn't being very helpful, and sold me a machine, which i've managed to get up...

Crikey sorted it again, Head cables on Cyan head must have been on there way out, the dots on the alignment marks were all over the place, so i thought that may have been it. Blue and yellow are clean again

Well thanks very much to DrunknMonk Gary for the spare parts i got today, changed the firwire board and set about aligning the new head everything is printing great, except for yellow and cyan seem to be streaking across one another, cant work out what it might be, ive cleaned all the heads...

can you get in touch ive messaged you ok

Hi Mike, all sorted now but had a few errors sisnce lol due to me being a pillock and rushing things, i did replace the captop station complete with new caps, and ran new tubes back to the pumps in the rear of the machine, i used to buy cap tops and do the balancing trick with the springs and...

turn off the web address links to thats a PITA when its turned on.

just to inform you i think ive fixed it like i said i just changed out two of the dampers on the black head, and now it isnt dropping anything, i had a feeling it could have been those. Alan

Hi guys, wonder if any of you can cast your mind back, i have a JV3 thats new to me, but mint condition for it being a 2006 model, its been used as a second production printer all its life and been serviced regularly. Anyway i got it last September, and this week the cap tops where looking like...

i have had experience of rolands and mimakis, early models though, and JV3' s beat rolands every time, especially in reliability in my eyes,

Also i will say one thing, if you have an early i1pro, the gretamacbeth type used with the imatch 3 software it wont load the USB drivers in with the software on windows 10, search the i1pro website for the latest USB drivers and they do work with the software on windows 10 but you have to...

ignore that last post i had lost yellow and cyan print head, but after a couple of strong cleans i got them back, now trying to create a profile with my new to me i1pro Alan

thanks for that, well i've purchased one from Denmark which is badged as an i1pro revision 4 and it look like it has all its accessories with it. cant wait for it to arrive now. dont know why because ill be probably pulling my hair out two days after it arrives trying to configure everything...