Recent content by badouali

Sign Maker And Large format printing

Its called been ambitious. When i first got my Mimaki, i never had a clue on how to even put it on. Look at me now. I fix almost all the problems it develops by myself and now am one of the biggest outdoor advertising company here in my country.

Hi i know this is a forum for Mimaki. But does anyone have a Wit Colour Ultra to help me with the installation. I recently purchased the Wit Color Ultra 9100 3.3 (2 heads)and have installed it. But can anyone please tell me how to operate it and any other helpful tips i may need. Thanks

i recently had same problem with my mimaki jv3 160s...and its a pleasure to share my experience with others on this forum..which is now solve...... please look at all parts in your capping station...... i also recently changed my capping station which i did not fix properly.....but after...

Hi recently bought a Wit-Colour Ultra 9100 3.3m with two DX5 heads option. I am not really convinced to use the wit-colour inks because they can only guaranty it outdoors for 7months. I need to know what ink i can use that will last atleast a year and also easy on the heads and display good...

am also having same problems with my mimaki jv3 160s.......the yellow going into the blue damper ...... i hope you found the solution to this problem ....i had also tried everything ...now am waiting for my new pumps and caps to change all and see if problem is solved,,, please keep me posted...

I dont have the manual,thats why i came online to ask for help.

Not PC. I mean the actual Mimaki JV3 250sp. I am not talking about pc.

Yes please. The one behind the firewire board located at the motherboard.

HI. Can anyone give me tips on how to remove the battery on the motherboard of the JV3 250sp. I have already removed the Firewire board. But i dont have a clue on how to remove the battery. Thanks

Hi everyone. I am using a JV3 250sp with Flexi 8.1 Rip. I am currently having problems printing the exact colors that do appear in some artworks. They always appear a bit darker. I dont know if it has to do with the profiles am using or what. I have tried increasing the contrast and the...

I think the cap tops was touching the heads and that was what caused it. I had a problem with the head height cos it was staining the media when i was printing. So i lifted the head height a bit but then it was not contacting the caps properly due to the fact that when i try to suck with the...

I think i need to change the capping station then cos its not normal the way it just siphoned up all the ink in the blue cartridge. The pumps are new so i dont think thats the problem.

I went today and found out that the waste ink bottle was full with ink. I also noticed that both my cyan cartridges are completely empty. The last time it did that, the black cartridges where empty. What could be the cause of this because i have just wasted over $240 worth of ink.

Well i have even changed the media from Vinyl to Banner. Its still doing the same thing. I have moved the margin and all. I think the Paper width sensor is gone. I have ordered a new one and hoping that it should fix the problem. Will update you when i get it. Thanks.