I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Dear all
Long time no post !
My latest printer (a VG640) displayed HEAD PROTECTION ACTIVATED yesterday & now pauses after every pass
Does someone know the cause of this & how it can be resolved?
Thank you
All
Can anyone let me have their experiences with the Epson SC70600, especially how reliable the printers is and what are the typical failures - printhead, dampers, pumps or anything else?
Thanks
Hi all
I have a Mutoh 1304w and would like to print florescent yellow and pink onto transfer paper. I am using the Onyx RIP. How should I go about profiling this ink?
Any pointers would be greatly appreciated!
Thanks!!
They are the same head. The part that differs is the manifold, the black plastic part on top the head. This is made from a solvent resistant material on the heads for solvent machines.
hi all
Does anyone have a PDF copy of the service/maintenance manual for the XR640 they can let me have?
my email is voyagerr1@gmail
Thanks in anticipation
Have any of you good people bought a printer yet, if so, please can you tell me the following
What ink set up you are using
CMYK
CMYKmcww
CMYKmckw
CMYKkmco
Or another combination?
Are you printing via Rasterlink Pro or another RIP?
What print speeds do you commomly print at for a particular...
Hi all
In respect of this machine please can someone confirm which heads are fitted - Epson TFP or Ricoh?
If anyone has an operators and/or service manual pdf for the JV300 they could let me have I'd be eternally gratefull :-)
Thanks!
Thank you
I had been trying to do this using the wired ports on a wireless router & couldnt get it to work.
I suspect that I was using the wrong tool for the job, so will invest in a proper hub/switch.
Thanks!
Hi
Please can someone advise me on the best way to connect two ethernet printers (Roland & Mutoh) to a computer with one ethernet port?
I've tried using a normal router with no success - do I neeed to add some 'routing' software?
Can I add an additional board to a spare PCi slot and run one...
Dear all,
We are still pondering on this machine and one of the issues is whether the white ink is a good option to take up
Of those of you that have this printer do you use white ink and in general usage does anyone run much white ink anyway regardless of machine??
Thanks!
One of the things that gets overlooked is the one way valve built into the connector to the damper. This I've noticed (particulary with black) blocks or sticks and this can give you drop out.
Before changing pumps ect. try changing this part.
hi there
I need to convert my JV33 from 4c to 6c - something I have done in the past, however I have been told than it is only possible to do this a fixed number of times.
I would like to have a backup plan and thought this if I could re install the firmware to would reset the machine...
Hi all
Please can you tell me what your most common used mode is when using the OEM ink with a self adhesive vinyl (MPI3000/Mactac 5829)?
Bi directional?
Varidot?
8pass?
720x720 or lower?
I'm using Onyx 7.32 RIP
Thanks in anticipation
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.