Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ratings bowtievega has received

  1. JBurton rated bowtievega's post Agree in the thread Mounting a Raceway When There's Nothing Behind.

    We have good luck using the zip tie toggle bolts. Way more pull out strength in drywall than normal screw in anchors. Also work...

    Jan 31, 2020
  2. Reveal1 rated bowtievega's post Agree in the thread Need Help Flexi is printing all black inked sheets, no graphics..

    Occasionally we have that problem as well. When we have a file with a bitmap, lets say a photo we are using for a post up, sometimes...

    Jan 29, 2020
  3. TimToad rated bowtievega's post Agree in the thread Need Help Silicone failure? Opinions needed!.

    We have used silicone for attaching letters and panels to most substrates for as long as i can remember. I can't recall ever having a...

    Apr 30, 2019
  4. brycesteiner rated bowtievega's post Agree in the thread Healthcare.

    My family ditched our health insurance a couple years ago. Premiums were way too high as well as the deductibles. On top of that you...

    Apr 10, 2019
  5. Billct2 rated bowtievega's post Agree in the thread Cultured Stone Wall.

    Ya if the stone was properly installed it won't come off the wall so easily. With that being said you can break the stone, especially...

    Jan 12, 2019
  6. KMC rated bowtievega's post Agree in the thread Cultured Stone Wall.

    Ya if the stone was properly installed it won't come off the wall so easily. With that being said you can break the stone, especially...

    Jan 11, 2019
  7. equippaint rated bowtievega's post Agree in the thread Check the Price of ACM before you bid.

    What bothers me is as the price of import aluminum keeps going up due to the tariffs it was supposed to make domestic aluminum more...

    Jan 4, 2019
  8. Sandman rated bowtievega's post Agree in the thread CNC cutter egly edges in ACP.

    We typically cut ACM at 18000 rpm at about 100 ipm with a 1/4” single ‘O’ flute up cut bit from Onsrud. If they are small pieces and we...

    Apr 19, 2018
  9. DerbyCitySignGuy rated bowtievega's post Agree in the thread Question Cleaning acrylic for flatbed printing.

    Make sure you guys are careful using Isopropyl alcohol on acrylic as it can damage the surface if left in contact too long. It is not...

    Mar 1, 2018
  10. TimToad rated bowtievega's post Agree in the thread Question Best method painting PVC.

    I agree on not recommending PVC panels in the sun, especially dark colors. It expands way too much when it gets hot and will curl. We...

    Oct 13, 2017
  11. PenSigns rated bowtievega's post Agree in the thread Desperately Need Some Help From Ul-certified Shops On Testing Procedures.

    Welcome to the world of UL lol. We had the same issues when we signed up. I couldn't believe i had to purchase a certified weight and...

    Mar 20, 2017

 


Loading...