Recent content by bubs

Just to close this one, we got the engineer back to fit the new cables and it still wasn't working properly, turns out the bracket for the z axis was ever so slightly out of line causing it not to be properly read by the sensor, quick bent of that and it all seems to be Ok. If the cable had...

We're still having this issue, called the engineer in and they have recommended replacing the main cable but at a cost for £700!! (£550 just for the cable) I've opened up the sleeve and it just seems to be the foil sensor cable that's broken. What has now happened though is that the edge isn't...

Thanks for the reply. Unfortunately the line of print appears just before each colour starts to print, ie when the head goes down. So i get a line of colour at the start (when the head first initialises) the head goes back up then the vinyl will roll on until the area where the colour is due to...

Hi all, Been using the edge FX for quite a few years now but recently it's started printing a line of colour when the foil starts printing. For example the print will feed the vinyl through until the place to start printing and it will create a thin line of the colour before the printed piece...