Recent content by buzzgraphics

i'll give it a shot and see if it helps. thanks!

I'm about to start punching babies... Printing on 3m 780 reflective (epson s80600), laminating with avery 1360. Now 75% of the time when this goes into the graphtec for printcut everything comes out useable. BUT SOMETIMES.... it just decides that a half inch off is close enough. Today is one of...

We got a winner. Too hot in the shop coupled with too hot on the platen. Thanks for thinking of it.

I’ve printed three of these panels. The first one was fine. The problem got steadily worse until the last panel which I posted a pic of.

Excellent question! The initial print was on Avery 1105. I tried printing the same file on 3m 40c and yes, the banding is still there.

Hey folks, I’m getting weird banding when printing solid gray on my Epson. It’s hard to see in the pic but the banding doesn’t go all the way across the sheet. It drops in and out throughout the middle of the sheet. It also moves around the sheet as it’s coming through the printer. I’ve already...

never mind. we got it up.

is anyone else having issues with flexi cloud not getting past the startup screen? I'm stuck at the tool engine loading message. I don't need this today... Rich

Hey guys, I'm new to the flatbed world and looking at adding a cnc router to finish cut to wood. The units I've been looking at simply read gcode. Coming from the vinyl world, we print corner bomb site marks on a printcut job, the cutter reads the marks (either manually or automatically...

hi, I'm interested in unlocking my vj1624. I'm using bordeaux inks but keep getting s/c errors on new cards. Can you help?

wow! I let this simmer for a couple days and I come back to a wealth of information. thank you so much for all the reports and offers. I'm going to do some research on all these options and hopefully have a clearer idea of what will work for us. I may look at some used upper end machines to get...

100-200k. talking with local suppliers and I will probably go to Sia in Vegas in April. just getting my ducks in row. looking at space and power requirements so we're ready when we pull the trigger. Also considering dye sub as an option too.

any thoughts on the Roland 640?

Hey guys, I'm looking to add a flatbed to the mix (we have a couple of Mutoh ecosol printers). This machine would be primarily printing on plywood blanks at high resolutions (fine art). I've been eyeballing these machines for a while, but we've gotten to a point where we outsource enough of this...

Hey folks, any recommendations for wholesale wrap installers in Raleigh? I have a client that is opening up a new facility out there and needs a wrap on a Ford Edge.