Recent content by Cooper E

We are a safety equipment manufacture and so far what we've found is 13oz scim is the substrate that last the longest in the field for ANSI's requirements of life of the product. Our tags are 1" x 4" so edge finishing isn't and issue and I've never seen them come back in bad shape based on how...

I've been tasked with finding a machine to print two sided 13 oz vinyl scrim. We've bought the tag sets we use overseas but they would like to see about bringing it in house. We currently have a Roland XR640, Summa D4 and Mutoh 1324 none which have two sided print/registration capability...

Thanks, IT may have finally found the issue with the network. They had a temporary switch assigned to port 9100 and they switched it to the new switch and everything seems to be fine now. They didn't realize that switch was managing the print port until they double checked the network...

I have a Mutoh VJ1324 which I've started running into an intermittent write port error in the middle of printing. The message in my job log is " Internal error happened during printing - convert print job error ". We use SAi Production Manager cloud for our management software. We've had our...

I've used their support and it's been great both phone and tech for my DC4 and D140. I'll be going with a second D140 with OPUS because I've seen the difference with and without it. The thread reinforces the way I was already leaning based on my research but hearing from people real world...

Right now we have a Summa D140 we need a second plotter which I was going to buy a second D140 but I have a dealer that wants cut us a deal to replace the Summa with two Graphtec 8600. I've not used and Graphtec plotters and I want to know how they compare by to Summa from people who have used...

From what you describe I ran into this issue (or something similar), there is a setting called Auto Load under the Configuration Menu which when calibrated is turned "On' by default I believe, you have to set Auto Load to "Off".

Adding to the thread because I found another reason for the double cut on my Summa D140. I ran into art that the designer had applied a transparency in AI on one of the cut elements that wasn't apparent only 2%. When we tried cutting it was double cutting all the contour cuts. When I tried the...

We are looking for a sublimation printer that will print roll to roll 1.75" heavy webbing material. We are looking into a Colaris-NF Compact and want to find out if there are any other printer manufactures that make a sublimation printer in this format. Thanks for any leads.

On a new equipment search.