• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Dan Thomas

  1. Need Help Roland VP-540 Connection Problems

    I found going back to windows 7 has stopped disconnection half way through print...….. windows 10 conflicts with connections with older machines are troublesome I have found
  2. Roland VP540 disconnects from printing

    Hello, Running VW5.5.1 on windows 10 with Flexi pro 11. I send to VW or Production manager and 1out of 4 times or more it states printer not connected in VW and processing on the VP540. Direct attachment with cat cable. Print starts fine and get about half way through then loses connection...
  3. Need Help VP 540 no connection

    that was it!!! oddly enough! went into command prompt on my computer, ipconfig.. and it opened up the details for the ethernet adapter! how it changed so much is beyond me , but even when i tried to change it to my usual digits it would erase them as soon as I closed the adapter settings. Had to...
  4. Need Help VP 540 no connection

    just in case i picked up a usb to Ethernet adapter with still no connection to VP540
  5. Need Help VP 540 no connection

    Hello, Running Versaworx and Flexi 11 pro cloud for 2 years now with no faulting on printer. Whether timing or hardware failure, not sure, Installed Kaspersky same day Roland VP 540 failed. Both ends of Ethernet flash green / yellow but no hits when i open the options for ethernet connection...
  6. Gerber cutter running omega 6.5 contour cut

    Running gerber omega 6.5 , can print fine but when I try contour cut around decal it will not do it ,just cuts a square , but when I run a print and cut with Flexi pro 11 ,it contour cuts just fine? Watched the few minimal videos by gerber omega and it is not working. Any help would be great as...
  7. running Roland CX300 on flexi-user defined gives wrong size

    When I get ready to send to production manager and i hit user defined button for proper vinyl size, it always goes to 29.02 inches by 1680 inches, Every single time, no other printer or cutter does it. This is running on windows XP and flexi on Windows 7 and both do the same thing Thanks in...
  8. cut studio and roland cx300 with windows xp

    got it figured it was in the port settings, Works Great Now
  9. Need Help SummaCut D120

    Your Right! needed to clean the rollers and glide that guides the cutting head! Working great Again Thank you So Much
  10. cut studio and roland cx300 with windows xp

    when cutting with roland cx300 on cutstudio with windows xp, it doesnt cut the file but rather A0.0.CS0.CA0 everytime. but test pattern cut is fine. Thanks in Advance
  11. Need Help SummaCut D120

    Hello, Have shaking blade holder while cutting, when not on moves smoothly all rollers and belts, removed blade holder and ran test print and still shakes while cutting, eliminates blade holder cut strip or blade, motor maybe? cuts fine , throwing no errors . this is the older grey D120. running...
  12. Need Help Roland CX300 windows 7 64 bit using GX300 driver

    Hello,Roland Camm 1 Pro CX300, running Gerber Omega 6.5 CP and also Flexisign 10 , windows 7 pro 64 bit system. The printer is acknowledged but does not find vinyl size and autos to 29 inch even when theres 12 inch vinyl in cutter. when i send to printer it cuts out single cut numbers A6721.370...
  13. summa dc plus errors

    markers could not be sensed with opos test. calibration line feed missing middle inch of words fully through,x axis 21 etc. freezes flexi when trying to print and cut. HELP. density set to 12000 black as opti color.
  14. print data error on Gerber Edge with Signlab?

    All worked out, ended up with Flex pro 11 cloud bought used, Gerber works well with generic cord, same with usb adapter for the gerber cutter also, nice little system, Than ks for all the help guys
  15. Gerber Omega any version to buy

    hello, was it the software you just posted for sale, the 2.0 version? 850 USD to upgrade that one to 6.5, u were asking 500 USD plus shipping? I can have a new copy with dongle here in Canada for 1800 CAD, for the Omega 6.5 CP, our dollar exchange puts yours and the upgrade to 1775 CAD plus...
Top