• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Danskitt

  1. HP 800W - what do you think about it?

    Sorry, disagree

  2. HP 800W - what do you think about it?

    Never had a problem doing it with the roland and then it would be printing and not checking while I was off doing something else. The level of automation is not necessary, IMO of course

  3. HP 800W - what do you think about it?

    No it about the all the checks it has to go through, finding edges, finding the front edge, checking skew blah blah blah, the Roland you just line up, drop the clamp and away you go, if you didn't put it in straight that's your problem. The HP has made it into a plug and play machine so that...

  4. HP 800W - what do you think about it?

    I agree the set up times with HP are a killer, they need to have absolute control over every stage, we have the same with the 365. Our old roland XJ you could just throw the stock in and press print and would be going within a few minutes from cold

  5. HP 800W - what do you think about it?

    Thanks, perfect. I had heard that it didn't need as much heat to cure which is good as some stocks just wouldn't go through. Are you happy with the machine?

  6. HP 800W - what do you think about it?

    I was kind of looking for a review of what someone who has one already thinks of the machine in general not how good it is at specific things although I would imagine it can print all of those things you listed. To be more specific re ml per sqm, just looking for generic standard vinyl middle of...

  7. HP 800W - what do you think about it?

    Hi guys, I am considering upgrading our HP365 to the HP800w, those who have one what do you think? Also do you know how many ml coverage is for a sqm?
  8.

    Need Help Zund rough cuts with laminate on boards

    Thanks Flatbed, we are in Australia but thanks for the offer. We had a Z83 blade and tried that and it made a massive improvement, only got a faint amount of the dragging at the start of the cut
  9.

    Need Help Zund rough cuts with laminate on boards

    Thanks, I'll start trying some different combinations
  10.

    Need Help Zund rough cuts with laminate on boards

    Hi all, does anyone know why when we mount a laminated vinyl to a substrate and cut with a drag knife (usually Z10, Z11 or Z46) we get this strange jagged edge, get it on all stock that we mount to PVC, corflute and magnet stock

  11. HP 365 PIP

    Thanks balstestrat, is the a guide anywhere or manual?

  12. HP 365 PIP

    Hi all, Do you know if the HP360 PIP fits the 365 model, I can't find anywhere to buy a PIP that says it is compatible with the 365

  13. Where can I get replacement lamps

    The printer is a Handtop 3200 with Kyocera heads

  14. Where can I get replacement lamps

    I don’t know either, they aren’t branded. Here are some pics

  15. Where can I get replacement lamps

    Hi all, I need to replace my led water cooled lamps, where can I buy these direct from the manufacturer, I’m in Sydney? Dan
See more
Top