• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by datablitz

  1. Vinyl on Powder coated steel

    Thanks, I just wanted to make sure.
  2. Vinyl on Powder coated steel

    Is there a period of time that needs to be waited to apply vinyl to a sheet of powder coated steel? I have a customer that had a sheet of steel powder coated, and asked me to apply vinyl to it. I just want to make sure if it needs to breathe before I apply vinyl to it. This will be an outdoor...
  3. CG-130SRIII pressure issues

    I have not tried that. The blade sits well in the holder, and I can not shake it out, but it's worth a try. Thank you Sent from my SM-G955U using Tapatalk
  4. CG-130SRIII pressure issues

    Yes, I did make sure the ring was under the locking tab. I am beginning to suspect it is not going to be a common issue Sent from my SM-G955U using Tapatalk
  5. CG-130SRIII pressure issues

    I have a 3 month old mimaki cutter and all of a sudden it takes almost twice the amount of pressure to cut my material properly. What used to take 30-35 pressure setting now needs 50-60. I have installed two different new blades, and the problem has not changed. Everything else on the machine...
  6. Edge adhesion

    I'm using FDC intermediate calandered vinyl. I cleaned it just with a dry rag. Applied dry. I don't think I can get away with edge covers on this job. They are sticking better over time. I could clean it with rapid prep, next time. I will try to heat it and see if i get a better adhesion...
  7. Edge adhesion

    I've got some vinyl I'm applying to pvc sheet, But the edges always seem to not stick well. What is the best way to keep the edges and corners tight to the pvc? I am trimming the vinyl and pvc to size together. Thanks Sent from my SM-G955U using Tapatalk
  8. Jv150-130 dimensions

    The information I am trying to get is not in the manual. I appreciate the attempt, but this is not the information I am looking for. I need the measurements of the printer head without the stand
  9. Jv150-130 dimensions

    I can't not find dimensions without the stand in the manual. Can you please tell me what page this information is on?
  10. Jv150-130 dimensions

    Is there someone out there that can measure the dimensions of a jv150-130 components? I am considering purchasing one and I am trying to figure out if I can maneuver it Into the room. I need to know the measurements of the main part of the printer off the stand. Thanks in advance!
  11. Thermoflex Easy peel maybe, but easy weed not so.

    i use the regular thermoflex plus all the time, and the backing is pretty sticky, but it makes it easier to weed in my opinion other than your arm constantly getting stuck to the backing. i thought the ez weed was supposed to not be sticky so you could stack weeded transfers. maybe i mis-read...
  12. Techs in portsmouth,columbus,cincinatti area

    im not sure if its too far for him, but artistic design systems in zanesville has a tech or two i believe. http://www.artisticdesignsystems.com/
  13. Google to start charging companies for listings

    yea, and i heard facebook is going to start charging all its members too. :doh:
  14. park ranger badge vector

    great thanks a lot maniac! i knew someone out there had to have one. the time to create something that complex is way more valuable than the $7.50 they charge. or even what ever vector doctor would charge. i have very little time in my days to convert images to vectors. thanks everyone.
  15. park ranger badge vector

    i can get a picture of a real badge if it would help
Top