• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by divers2deep

  1. FONT ID PLEASE!

    ANY HELP WOULD BE GREATLY APPRECIATED. THANKS.
  2. What is this font?

    Thank you all so much for the help.
  3. Font ID help please!

    Thanks in advance!
  4. FONT ID HELP PLEASE

    COULD ANYONE PLEASE LET ME KNOW WHAT THE FONT IS FOR LETTER AND NUMBERS ? THANKS!
  5. post lamination alignment issues

    The lighting seemed to fix the issue at hand. I simply shut the lights off to half of the room where the printer is located. I did not have any other issues. Thanks for responding.
  6. post lamination alignment issues

    Ive done that as well and my cut is near perfect on the edge of the box it prints.
  7. post lamination alignment issues

    VS-540 Media IJ-35 - Matching lam. I have been struggling with my cut lines post lamination. I understand that creating a bleed is necessary to ensure proper cuts, however my cut line are way off that even with a bleed, the cut offset is highly noticeable. I will discuss my last job -...
  8. Font Id Help, Please

    Thanks a lot.
  9. Font Id Help, Please

    Thanks in advance for any help with this.
  10. Roland VS-540 Black Bad nozzle test

    Update on this, I tried slowing the print head to 700 and going uni directional and my prints are now perfect ? however a 9 minute print is taking 40 minutes, but im printing. could this lead us towards something else, any thought ?
  11. Font Id Please

    Initially I though Rockwell but the R doesnt match up. Any advice would be greatly appreciated.
  12. Roland VS-540 Black Bad nozzle test

    Also, with the single head VS, why would this only be the black ink having issues, if the pump was acting up. I'm simply trying to grasps how everything works in this machine, I appreciate your feedback.
  13. Roland VS-540 Black Bad nozzle test

    While printing, is the pump actually drawing ink from the head. It never appears to really dock and seal to the cap during this process ? Does the pump have an active part in keeping the system primed ?
  14. Roland VS-540 Black Bad nozzle test

    something I simply cannot comprehend is if I had clogged nozzles on the black, why do I constantly get the fluctuations in firings. Is it possible that during cleanings the suction is strong enough to pull ink passed the nozzles, but while printing the suctions needed is no longer there ?
Top