Recent content by DJr

5% Limo tint works great! Sent from my iPhone using Tapatalk

Are u sure a rodent hasn't died in between a wall or false ceiling somewhere? That happened at our shop and it took some time to figure out. I doubt it's materials as you wouldn't have it on two different brands. Good luck! Sent from my iPhone using Tapatalk

Use swifter dusters on the print as you are feeding the print through the laminator. However cleaning the shop weekly is a must. Sent from my iPhone using Tapatalk

Yes set to dither it will rip much faster Sent from my iPhone using Tapatalk

Not so rare we went through 2 Tru Vis printers for the same reasons they couldn't figure out multiple error messages. We went to a XR 640 Pro 4 and it's been great. Sent from my iPhone using Tapatalk

Happens to is on every install. Normal will go away doesn't matter what brand you use. It's the laminate sticking to the glass through the holes. Will go away in a few days. Sent from my iPhone using Tapatalk

1 shot paint will work we use to paint on vinyl all the time back in the day when there was still hand lettering going on. Worth a shot 1 shot that is. Sent from my iPhone using Tapatalk

You have to be busy or it will kill you. We do a lot of sub contracting 1099 action as it's hard to keep these caliber of people busy and happy all the time. Sent from my iPhone using Tapatalk

Going rate here is between $25 and $30 an hour with that much experience. Sent from my iPhone using Tapatalk

It's a NO NO without written permission from the image / logo owner. Then you still have to verify the person giving you permission is legit. Money doesn't matter as that transaction is very difficult to prove. Sent from my iPhone using Tapatalk

A little bit but worth to not have issues in the harsh climate. When I explain this to my customers they usually don't mind paying a little extra for the quality and longevity. Good luck! Sent from my iPhone using Tapatalk

Should last 6mos if 1/8" thick wall mounted. If using Max Metal you will definitely want to spray the edge as the salt air will start to corrode the aluminum edges quickly. I live in south Florida and have the same issue here. Solid aluminum blanks would be a better option. Street sign grade...

Looks like defective material having to do with the coating process. Have supplier replace with a new roll different lot number and see if it fixes the problem.? Sent from my iPhone using Tapatalk

Definitely laminate! Sent from my iPhone using Tapatalk

Oracal 5600 RA prints great and can be bought in 10yd increments to save $$ if not being used all the time. Sent from my iPhone using Tapatalk