Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ratings dypinc has received

  1. Ldireprophil rated dypinc's post Like in the thread Roll laminators vs flatbed.

    Can't really tell from the specs on the GFP 363TH if it is bidirectional. If it is, is there really much to gain by going with a table...

    Feb 26, 2020 at 10:21 PM
  2. Bly rated dypinc's post Like in the thread Printing Grey with HP Latex 360.

    Re- Calibrate and if that does not do it create a new profile. In rare instances a media preset with it calibration can become...

    Feb 14, 2020
  3. ColorCrest rated dypinc's post Like in the thread Printing Grey with HP Latex 360.

    Re- Calibrate and if that does not do it create a new profile. In rare instances a media preset with it calibration can become...

    Feb 13, 2020
  4. Tyler Birch rated dypinc's post Like in the thread Light Gray coming out grainy - HP 365.

    What is the GCR and especially your black start of your output profile? That will affect how much black you are using in your grays. The...

    Jan 3, 2020
  5. DrunknMonk rated dypinc's post Like in the thread i1 Pro v HP 365 on board.

    4 and 6

    Dec 19, 2019
  6. DrunknMonk rated dypinc's post Like in the thread i1 Pro v HP 365 on board.

    The best way to hit Named Pantone colors like that is to look at the output CMYK values in Onyx color replace and use that as a starting...

    Dec 19, 2019
  7. DrunknMonk rated dypinc's post Like in the thread i1 Pro v HP 365 on board.

    You should not be using any profile to print the swatches that you are measuring. Choose in Onyx the media preset you have selected on...

    Dec 19, 2019
  8. Stinky Prints rated dypinc's post Like in the thread Magnum Engage Magnetic Receptive vs HP Latex 365.

    So Magunm does not not supply oms files for the 300 series printers. Go here and look. https://www.printos.com/ml/#/medialocator Or...

    Nov 8, 2019
  9. TheSnowman rated dypinc's post Like in the thread News Via Executive Order, Adobe / Venezuela.

    You can vote in socialism but you have to shoot your way out of it.

    Oct 22, 2019
  10. TomK rated dypinc's post Like in the thread Suggestions HP 360 preferred vinyl.

    So what is the problem with HP Prime Air GP vinyl? Since the plasticizer migration issues General Formulations of late especially...

    Sep 24, 2019
  11. Andy_warp rated dypinc's post Like in the thread IS COLOR MATCHING EVEN POSSIBLE??.

    If the spot color libraries that come with your RIP are not good enough or your are matching a custom color do this. The only spot...

    Sep 17, 2019
  12. BigfishDM rated dypinc's post Like in the thread What do you want?.

    Same here on the cast vinyl. Rarely every do anything that big that isn't long term. If they want short term that size they can just...

    Aug 23, 2019
  13. mkmieciak rated dypinc's post Like in the thread What do you want?.

    Same here on the cast vinyl. Rarely every do anything that big that isn't long term. If they want short term that size they can just...

    Aug 23, 2019
  14. ddarlak rated dypinc's post Like in the thread Latex 335 - material crumpling.

    With automatic substrate loading, after it first loads I lift up the pinch rollers and rewind some back on the feed roll. That seems to...

    Aug 22, 2019
  15. JMPrinting rated dypinc's post Like in the thread Do you ever bump customers on your schedule for other jobs?.

    The the late paying clients are are on my push back list. Otherwise I try to do everything in order except for a rush job once in a...

    Aug 11, 2019
  16. djdg rated dypinc's post Like in the thread Need Help Calendered OR Cast Vinyl for Printed Exterior Sign.

    Check into polymeric calendared. Not as good as cast but better than monomeric calendared. Anyone have any real world test result with...

    Aug 7, 2019
  17. Claudio Oliveira rated dypinc's post Like in the thread Need Help Orajet 3641 Warping and Shrinking.

    Orajet 3641, Release Liner 83# silicone coated paper. That will cause you problems. You need a 90# for good results with latex. You can...

    Aug 5, 2019
  18. Aireana rated dypinc's post Like in the thread ICC Profiles.

    https://hplatexknowledgecenter.com/storage/app/uploads/public/5a5/0a7/b7d/5a50a7b7d78be794326131.pdf

    Aug 1, 2019
  19. Bevets rated dypinc's post Like in the thread Slowdown????.

    After the 2018 elections things were bound to slow down just like they did after the 2008 elections. Business does not trust that party...

    Jun 23, 2019
  20. fresh rated dypinc's post Like in the thread Need to refurbish Lamintor Rollers.

    I have used these guys before and the did a great job. https://www.a-kornroller.com/index.html

    Jun 3, 2019

 


Loading...