• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Eurodesign

  1. Return not to origin after vinyl cut job is finished - Roland GR2 - Cut Studio

    thanks for your reply, I looked for that but there is no option. :-(

  2. Return not to origin after vinyl cut job is finished - Roland GR2 - Cut Studio

    does any one know that my cut job is not returning to origin after the cut job is finished? My machine is Roland GR 2. I cut log sheets back to back and every time the cut job is finished it returns it to origin and I have to pull the whole sheet to the end again to cut it off. I am using...

  3. HP 365 Latex Printer, print, laminate and contour cut

    thanks for the hint, I will try that, I was actually thinking about that too already.

  4. HP 365 Latex Printer, print, laminate and contour cut

    I have an HP 365 Latex printer, the printer prints fine but when I print with crop marks, then laminate and then contour cut, my new Roland Cutter GR2-640 does not want to read the crop marks. I am using Flexi sign Production manager Subscription which came with my printer. I like to design my...
  5.

    Need Help CET x-press 500 - Negative Pressure pump

    Hi there, I need help to find out why the pressure not goes up to -3.5 after I replaced the negative pressure pump. Is there a reset button I have to use? Also my printer has two pumps in the back. Does the printer actually need two attached. I thought the second one is only for back up. Thank you
  6. E

    Sign company

    Sign company

  7. Roland Soljet Pro4 XR-640, printing white and then red on clear

    I will try the double layer of white and see what it does. yes, I would like to use cut vinyl but it is such a small print it makes it impossible to weed the numbers out.

  8. Roland Soljet Pro4 XR-640, printing white and then red on clear

    Hi there, I am running the Soljet Pro 4 with white option, I am using Versaworks Version 5.1.1. When I am printing white as the first layer on clear, then after waiting 15 minutes dry time the second layer red and lay this down on metallic vinyl there is no vibrancy to the red (M:100 and Y...

  9. CET X press 500 - profile needed for Onyx

    Thanks to all of you for your input. We could get it going pretty good now and the colors are on.

  10. CET X press 500 - profile needed for Onyx

    no luck, it tells me too many attempts and my ip will be banned :-(

  11. CET X press 500 - profile needed for Onyx

    Cet Matt, unfortunately I can't access the link as it requires a username and password. Btw I am running Onyx Production House 10.2.5.

  12. CET X press 500 - profile needed for Onyx

    CET Flatbed Hi Matt,thanks for getting on this for us. We are using the 50 series (Part # of i.e. magenta CET-500-510-01) Single row Spectra Polaris print heads. CMYK (no white). I found out that there are some Profile downloads available on the flora website. thanks for your help

  13. CET X press 500 - profile needed for Onyx

    Hi there, we just got your new CET flatbed printer installed and run the Onyx software which came with the printer. We ran this software before on the Solara Gerber machine and the profiles worked fine on that machine. The CET print quality is perfect, just the onyx color profiles suck which...

  14. Mimaki JV-160 SP, Damper Replacement

    HI Everyone, I got it all fixed now and I am up and running, just want to say Thanks you for all your input which is highly appriciated. Happy Helloween!

  15. Mimaki JV-160 SP, Damper Replacement

    BoF I still couldn't get it going, you definately did a great job by explaining it. I think I might have done something wrong, would I have to pull the ink with the syringe as long untill the inkline is filled up totally to get the air out? I didn't do that as I thought it will do it by itself...
See more
Top