• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Exxoh

  1. Sc-545ex ink flow problem

    Very possible. But I’m not sure how to go about properly aligning them. Doesn’t the head alignment function require printing?
  2. Sc-545ex ink flow problem

    Thank you very much for the info. I replaced the dampers and pulled the ink through them...the ink didn’t retreat this time. I reinstalled the cap tops again and went ahead and tried the filling cycle. Again nothing moved. At all. No ink on the cap tops at all. And of course the lines from the...
  3. Sc-545ex ink flow problem

    Yes sir, I replaced the o rings as well. But I actually pulled the ink from the lines where it attaches to the dampers, so not from the damper itself. That only leaves the connection to the cartridge or the cartridges themselves. I’m using refillable bulk carts. If the fill nozzle on top of the...
  4. Sc-545ex ink flow problem

    Should the caps be free flowing when not installed? I only pulled the 2 so far. I was waiting to see what I could find out here first. also, how would I go about making sure the capping station and heads are properly aligned please?
  5. Sc-545ex ink flow problem

    I have a Roland sc-545ex that I purchased with stopped up heads. I replaced all 6 heads, dampers and cap tops. I pulled ink to each of the dampers with a syringe.. (the ink retreated back into the line after removing the syringe). Installed everything back and I’m getting no ink to the cap tops...
  6. WTB Mimaki roll holder assembly 54”

    I’ll absolutely take it. Thanks! Just let me know how much total and I can pay you immediately with PayPal. My email is kidtransam@gmail.com. Thanks again!
  7. WTB Mimaki roll holder assembly 54”

    I’m hoping someone has a parts machine that would sell the roll holder assembly. I would need the left and right roll holder, the slider bar, and the bracket that attaches to the machine. The model doesn’t really matter as long as it is from a 54” machine.
  8. E

    Hi Robert, I was just hoping that I could get a copy of the service manual for a Roland...

    Hi Robert, I was just hoping that I could get a copy of the service manual for a Roland SC-545EX. I would greatly appreciate it sir! my email is kidtransam@gmail.com thanks a ton!!
  9. Roland SC-545ex Service Manual

    I just recently picked up a SC-545EX. Does anybody have a copy of the service manual that you would be willing to share? My email is kidtransam@gmail.com Thank you!
Top