Recent content by gilb04

Hello, you reply two years ago on a post for my albatros pj1304nx about encoder strip. In fact this part was wrong then i changed it the machine is OK. Now i have an another trouble i think you can give you advice about it. The machine don't perform completly the ink filling and i have this...

OK i hav got the maintenance manual they said after changing the timing fence it' s necessary to adjust the the print image quality by adjusting the head accurracy. To do that i have to move the position of the print head. I'm afraid to make damage.

Thank for reply, how can i reset the home position ?

I recently purchased an Mutoh Albatros PJ1304NX after changing the timing fence and the timing encoder i have this message E070 ERROR "Y-AXIS ENCODER" i think is about the adjusment but i don't have the manual does any one can help me ?

I have an FJ 50 converted and (see my messages on roland forum FJ 50 converted gilb 04) does the Techink can solve my problem

fj 50 heater plug OK I have plug my heater but the problem it same, i have only yellow printing after 15 cm. I think the ink it not good. When i made the conversion it was for mild solvent ink and on the bottle that the seller gave me it's write solvent ink for roland SJ 540/640 and 740 EX series.

I have got the heater, but it's not connect to the machine yet, because the seller didn't give me the sheme to plug the coponants. For me the heater is just to heats the medias when it's goes out, if you think it necessary to connect the heater to solve my problem. Does the heater heat the ink ?

Need help please I had converted my HIFI Jet 50 to mild solvent ink, by changing the head, the dampers, the capping and the pump. My problem, after 15 or 20 cm correctly i have only the yellow color printed. After i have had setting the capping possition several time, now the six color are OK...