• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by graphicsphere

  1. Are you an Experienced User that owns a Roland LEC-330 with CMYK+Gloss+White ECO-UV4 Inks installed?

    Message me if you need me to explain how to save your LEC-330 peck report and parameter settings. I created a YouTube video on how to use the peck tool on a LEC-330. Here is the YouTube link:
  2. Are you an Experienced User that owns a Roland LEC-330 with CMYK+Gloss+White ECO-UV4 Inks installed?

    Yes all the UVS ink in my LEC-330 has been flushed and new dampers, cap tops and tubing has been replaced just waiting on someone to get me those peck files I need. I found somebody on that Facebook Group that Mike Gay is the admin and they were suppose to send me the peck files and has kept me...
  3. Are you an Experienced User that owns a Roland LEC-330 with CMYK+Gloss+White ECO-UV4 Inks installed?

    changing parameters from another same printer with different settings does change some important things but as long as I go thru both reports from both printers and compare what’s changed and change it back to the original settings the printer will work like normal and the ink type and mode that...
  4. Are you an Experienced User that owns a Roland LEC-330 with CMYK+Gloss+White ECO-UV4 Inks installed?

    Hi I’m looking for someone that has a LEC-330 report and parameter settings they saved using the Roland DG peck tool. My ink settings are stuck with the UVS type so can’t change back to UV4 type until I use someone’s parameters with the UV4 ink type and CMYK+Gloss+White ink mode (LEC-330).
  5. Are you an Experienced User that owns a Roland LEC-330 with CMYK+Gloss+White ECO-UV4 Inks installed?

    Are you an Experienced User that owns a Roland LEC-330 with CMYK+Gloss+White ECO-UV4 Inks installed? Hi I recently purchased a Roland LEC-330 from someone that didn’t know much about the machine and have some questions that I would like to ask you if you could PM me or send me a text message to...
  6. Flushing Position Adjustment for Roland VS-540i ink dripping out of left side of capping station

    The pictures above was right after doing cleanings that way I can show you where the ink is dripping out of the capping station. Does your capping station get ink there too or do I need to adjust?
  7. Flushing Position Adjustment for Roland VS-540i ink dripping out of left side of capping station

    I tried a flushing position adjustment in service mode but I notice there is ink now dripping out of the left side of capping station after cleanings (picture1). So when I did the flushing position adjustment it says to press the ENTER key when the arm part of cap unit starts to move which I did...
  8. Roland VS-540i Test Print Colors Order

    I ended up replacing the cap top then I plugged the drain line that is at the end of the drain bottle then filled the new cap to the top with cleaning fluid and let the head soak for 3 days. Then after I unplugged the drain line and did another cleaning and the new test print was almost 100%. I...
  9. Roland VS-540i Test Print Colors Order

    Trying to find out which order the colors of the Test Print are in for a Roland VS-540i so I can find out which color is missing nozzles to flush with cleaning solution. Looking closely at my test print I think the Color Order is Light Black, Cyan, Magenta, Yellow, Black, Light Magenta and...
  10. How to change VP-540 IC Cartridge Sensor (Reader) inside Slot

    I have a VP-540 that has 2 broken IC Cartridge Sensors inside Slot 3 and Slot 4 of the Ink Cartridge Slots. I attached a picture of the sensors that I need to replace. There is no manual on how to change them out and just need some pointers on what to take off first so I can get the sensors...
  11. VP-540 Printhead Streaking Lines

    Thank you the ribbon cables weren’t aligned properly. I removed all ribbon cables from Black Printhead, Carriage Board, Servo Board and Mainboard and aligned all of them very carefully and the “block printing” stopped and is printing normal again.
  12. Roland VP 540 head cleaning way to often!

    Here’s the answer: I have a VP-540 that has 2 broken IC Cartridge Sensors inside Slot 3 and Slot 4 of the Ink Cartridge Slots. I attached a picture of the sensors that I need to replace. There is no manual on how to change them out and just need some pointers on what to take off first so I can...
  13. VP-540 Printhead Streaking Lines

    I purchased a DX2 printhead for my Roland VP-540 less than a month ago and prints streaking horizontal lines across the media for one of the colors (the black printhead). I have attached a picture showing the streaking horizontal lines that happen during printing. I also replaced the head cables...
  14. Roland VP 540 head cleaning way to often!

    Hi I read your post about your VP-540 chips not being detected in service mode and goes into cleaning cycles every few minutes when printing. Did you ever find an answer? I have the same problem with my VP-540. I have tried taking the OEM Sol Max Chips off and put on my bulk cartridges and still...
Top