• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by graphixlee

  1. Looking for a new laminator

    Look at the KALA. Hasco Graphics in Cleveland sells it.
  2. My VS-540 is suddenly very LOUD! Suggestions...?

    Scan Motor A noisy carriage is usually a bad scan motor. I doubt you need to replace the carriage bearings - big job and expensive and usually not the problem.
  3. Looking to buy flatbed with clear/white capability and 4in thickness capability.

    Local Dealer Brent: Hasco Graphics, Inc., in Cleveland is an authorized CET Color dealer. 216-662-7474
  4. Looking to buy a flat bed

    Flat Bed Questions Are you planning to get White Ink? If so, there is a catch-22 in the HP FB-500. It has 6 slots for ink. The normal setup is CMYK LC LM. When you need White the LC LM must come out, and a changeover is done to the White. Time consuming and wasteful. When you need max...
  5. Pinch Roller marks

    Anyone have pinch roller marks on media on a Mimaki? Static electricity??
  6. How many cleanings during a 3'x5' print...VP540?

    Do you have "Periodic Cleaning" enabled on the printer? If so, disable it. The other symptom, pausing at either end and then printing a pass, is "data late". This is a network issue. The printer will not print a pass until it has all of the data for that pass. If there is a network...
  7. Becoming a Roland Tech...

    I have been told it is OK to go public with this. Proveer headquarters has received a letter advising them that they are being de-authorized. They must have had a cancellation clause in their contract because it is not effective until this Spring, I think April. Their local branches have...
  8. Contour cut issue with Roland XC-540

    If the 60 degree blade solved it that's great. If it did you must have changed the offset to .5 instead of .25 Some users say they have to turn the heat off and let the machine cool down before cutting ControlTac because it is so soft and pliable.
  9. Service Call 0010...?

    0010 is a Network Interface problem. Maybe even the Main Board (ouch). I agree with whoever said test it with a Crossover Cable connected directly from your PC to the printer. That eliminates any network problems (hub, switch, router,etc.)
  10. Becoming a Roland Tech...

    Dave: This forum is not supposed to be for sales, but I wanted to give you our contact info. Hasco Graphix in Cleveland has been a Roland dealer for 16 years. We do support what we sell. Web-Site is www.hascographix.com My e-mail is graphixlee@msn.com Pioneer lost the Roland line, and now...
Top