Recent content by HIGHTEC

error code 1290... HP 9000 yes, I had a client that had the same problem, error code 1290 flash on the screen. Froze the machine up, you have to go into Main. Mode and reset counters. Hightec Digital Robert Bradley Folsom, Ca :cool1:

to old dog Old Dog... Could be a bad encoder strip, there was another person on the forum that had your same problem and he cleaned the encoder strip and that fix the problem. Also if your machine is over 3 years old and and you use it every day, replace the Y axis motor. Just replace...

Replace dampers First replace your dampers, on the color that giving you problems. If that does not work, check the seal around the capping stations, make sure there is no tears or marks that would allow air. It need to be a tight seal to make sure the pumps are working properly. Also when you...

Head is bad You push to hard threw the head with a syringe you will blow the membrane. That a DX2 head. I did it on a DX4 head and got the same results. It seem that when you stick the head in an ultrasonic cleaner the head and vibration clean it nicely but when you push solution threw the...

thanks I will be going back to the printer toward the end of the week, I'm putting in new pump assembly for the capping station and the lower subtank pump assembly. I will take off the back cover and see what I can do, I ordered a new encoder strip, see if that helps. Keep you posted, and...

Cutting it short Do you have enough ram on your machine? How your processor speed also. Make sure your computer is not tap dry on resources. Hitec

Keep it cheap not a lot of people put thought into this one, but I know for a fact the line are smaller on 8 pass then 4 pass, if the density and linerization where set correctly when setting up the ICC profiles on 4 and 8 pass the ink consuption would be the same. As for cost. Who knows...

I'm looking for individuals that own HP 9000 printers. Or a techician out there that does regularly work on them. I'm a technician on the printers and I have an issue with one of them that I think I know the issue. This printer is printing horizonal line 6 to 12 in. in length to the right of...

Clean the head I've cleaned several HP 9000 heads, buy one put it in, then clean the other one if it under 2 years old. I have a ultrasonic cleaner unit. Cleans the HP good, but the DX4 and DX5 heads are very fragile and if your not careful can damage the membrane. Hightec Digital

Let's reevaluate the situation Tight time my friend, Summa is low staffed and the employee's are not giving a 110% like they should. I'm sure it a light infraction in the media feed controls. Probably set off in shipping the unit to your location. JR right,that printer prints better then...

Head cleaning I have some if you need it 1000ml for $95. I used it to unclog some heads on a Roland SC540 printer. I pluged the lines then soak the heads in the cleaning soultion. Then did several cleanings. Running Eco Solvent Inks. Guy was in the bay area, CA. Luckly I did not have to...

Contact a Roland Dealer in your area... Hightec Digital Service Technician on Large Format Printers:cool1:

bulk ink What printer do you have? The ink that I can supply you is high quality ink.... I use a bulk ink system in my large format printer and everything is fine. The cartridges that one of my clients use, I supply to him. The Roland VP-540, high quality ink, no problems. Same ink that...

had a client that set up a bulk in system on his Roland VP-540 printer. Switch back to cartridges.... Have a set of 4 CMYK cartridges for the highest bidder. Retail for $80 bucks each. Also can supply the ink... $140 a liter. CMYK Also I have a bulk ink system I put in my Mutoh...

Reminder Good to know...:thankyou: