• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by hybyza

  1. Opos

    Hello Tim, MacSign cut wont run the opos mark reading. You need Lite or Full version.
  2. Cutting Reflective IJ680CR

    I have had some issues with Spanish recommended reflective for traffic signals, and the problems were related to tracking not to cutting itself, that is why liner is important here (check if liner remains in good conditions after the tracking and cutting). About sending the job and the design...
  3. Cutting Reflective IJ680CR

    Which blade are you using? Have you tried the doble sided one for reflective? It is not always possible to get a good result with reflective, it depends on the reflective itself and of the liner of the reflective too.
  4. Summa D60 Better Blade?

    By the way, have you checked your blade holder bearings? There are 5 small metallic balls inside the metallic part of the blade holder base, excessive pressure and debris make them to be lost from the blade holder, consequently the cutting path is rough and not a new blade will help.
  5. D610 tracking

    I forgot to say I would change both tracking wheels, it seems a problem of tuning-up because of the age and use of the plotter.
  6. D610 tracking

    By not tracking well, what do you mean?: 1. The cutting path is out of place. 2. The movement of the media is out of place. If the cutting path is out of place, this means whenever you forward and rewind the media, the wheels are always treading on the same place (the same path), so it is a...
  7. Cutcontour, Flexcut in Wasatch?

    It is another colour in Summa palette as dclet says, but that´s only for DC machines, I guess it is not working on plotters (though I never tried that way), and S140T will only understand cut paths, not color paths, so I guess the only way is to work with 100% red paths (for flexcut), but I will...
  8. Cutcontour, Flexcut in Wasatch?

    Hi, I don´t know about that Wasatch software, but I guess if you are able to open your file with Winplot (export it as .eps) then you can do what you want to do with flexcut and contour-cut at the same cutting process. Remember this is only possible with Winplot 6.9, and the way to configurate...
  9. Summa S160 T / Onyx 7.3

    So if tracking is referring to shorten the image with respect to the cut then it is a software problem as insignia says, with tracking I understood misalignment of the media, not problem interpreting the cut path; sorry for my poor English trying to understand the problem itself and having...
  10. wincut 3.0 collector?

    Hi George, the only one I have is version 2.1, I don´t know if you have it or not, about 3.0, I can´t help you with that. If you need version 2.1, let me know.
  11. Summa S160 T / Onyx 7.3

    Not a software problem at all, if tracking is bad, there are no many things you can consider apart from cutting speed. 1. Check position of the pinch rollers and the double pressure option of the pinch roller. 2. Check the metallic rolls on the back of the plotter, are they in the same spot...
  12. D75r

    Hi negrozx, sorry for the delay, what I mean with the original point is that point of the axis of the opos sensor, so, it is placed under the cutting head itself. You can try manually to reput it in the original place. When the opos is pushed inwards, as it is out of place hits the pinchroller...
  13. How do I get this cuuter to go to sleep

    To know the age of the plotter, the serial number of the plotter is xxyyzz-00000, the year the plotter was manufactured belongs to the yy cifer.
  14. D75r

    Hi. Does it happen anytime you try to load media??? is the cutting head detecting the first pinch roller or it stops right there? does the cutting head goes to the second pinch roller or the head stops always at the same place you put the first pinch roller??? if the pinch roller stops always at...
  15. SClass and sandblast material

    Hi again, nice all this support here from you people, I will contact technical service, but strange thing anyway.
Top