Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ratings ikarasu has received

  1. JBurton rated ikarasu's post Like in the thread what to buy.

    Kind of... I used to charge by the SQFT before we had a Latex at work, we had a solvent and it died on us... They were going to...

    May 28, 2020 at 10:49 AM
  2. David40 rated ikarasu's post Like in the thread Question Does Anyone Make a Printer That Can Sit Idle Without harm?.

    Two full rolls for this one job. Where we didn't rotate panels, or do anything special. 12-15ft long panels that aligned perfectly and...

    May 27, 2020 at 3:24 PM
  3. AMGearhart rated ikarasu's post Like in the thread Boat Registration Numbers Complaint...for real???.

    Tell him you can re cut it. But if he wants the numbers changed you.have to re set up the art to make it compatible with your cutter...

    May 22, 2020
  4. WYLDGFI rated ikarasu's post Like in the thread Boat Registration Numbers Complaint...for real???.

    Tell him you can re cut it. But if he wants the numbers changed you.have to re set up the art to make it compatible with your cutter...

    May 22, 2020
  5. rydods rated ikarasu's post Like in the thread 3M material recommendations.

    Ij35 is cast and garbage. Use 180lse if money's not a concern. It is thin and air release... But it won't come off, it's a high tac...

    May 22, 2020
  6. Stacey K rated ikarasu's post Like in the thread 3M material recommendations.

    7725 is a good cut vinyl if it's just a single color your doing... But it's not air egress. I'd use 180-colored or 1080/2080 for that....

    May 21, 2020
  7. DustyCanine rated ikarasu's post Like in the thread 3M material recommendations.

    7725 is a good cut vinyl if it's just a single color your doing... But it's not air egress. I'd use 180-colored or 1080/2080 for that....

    May 21, 2020
  8. Joseph44708 rated ikarasu's post Like in the thread Need Help Sticker print and cut.

    Roland and Mutoh both call it outgassing. Each have their own recommendation for how long it takes - Most of the newer, low VOC inks are...

    May 17, 2020
  9. mikebamboo rated ikarasu's post Like in the thread Need Help Sticker print and cut.

    Roland and Mutoh both call it outgassing. Each have their own recommendation for how long it takes - Most of the newer, low VOC inks are...

    May 17, 2020
  10. Elizabeth77 rated ikarasu's post Like in the thread Need Help Sticker print and cut.

    Roland and Mutoh both call it outgassing. Each have their own recommendation for how long it takes - Most of the newer, low VOC inks are...

    May 17, 2020
  11. Jim Hancock rated ikarasu's post Like in the thread Need Help Sticker print and cut.

    Roland and Mutoh both call it outgassing. Each have their own recommendation for how long it takes - Most of the newer, low VOC inks are...

    May 17, 2020
  12. Joseph44708 rated ikarasu's post Like in the thread Does Speed Kill?.

    We have two printers. Sometimes they'll run 16 hours a day... Sometimes two. As others have said, Printing isn't our bottle neck....

    May 16, 2020
  13. 0igo rated ikarasu's post Like in the thread What bit should i use to cut corrugated plastic on cnc?.

    The flutes are thin plastic that just get pushed around.... We've never had luck cutting it perfect with our router. Even the drag knife...

    May 16, 2020
  14. david watts rated ikarasu's post Like in the thread What bit should i use to cut corrugated plastic on cnc?.

    The flutes are thin plastic that just get pushed around.... We've never had luck cutting it perfect with our router. Even the drag knife...

    May 16, 2020
  15. Joseph44708 rated ikarasu's post Like in the thread FC8600 Graphtec Cutting settings for CB09UB and CB15UA-K30.

    Did you get training on your machine? Not to sound like a dick, but odds are its a setup issue. A lot of vendors will sell you a...

    May 16, 2020
  16. VonsGraphix1969 rated ikarasu's post Like in the thread FC8600 Graphtec Cutting settings for CB09UB and CB15UA-K30.

    Did you get training on your machine? Not to sound like a dick, but odds are its a setup issue. A lot of vendors will sell you a...

    May 14, 2020
  17. Reveal1 rated ikarasu's post Like in the thread Does Speed Kill?.

    We have two printers. Sometimes they'll run 16 hours a day... Sometimes two. As others have said, Printing isn't our bottle neck....

    May 12, 2020
  18. player rated ikarasu's post Like in the thread Does Speed Kill?.

    We have two printers. Sometimes they'll run 16 hours a day... Sometimes two. As others have said, Printing isn't our bottle neck....

    May 12, 2020
  19. Eternity rated ikarasu's post Like in the thread Question Scitex Series - HP VS Triangle VS Nazdar Ink.

    Nazdar ink is plug and play. Triangle is not - Triangle you need to bring a tech in to flush all the lines / heads and switch over all...

    May 6, 2020
  20. The Doo rated ikarasu's post Like in the thread Need Help Use of translucent vinyl over white reflective?.

    I think thats for backlit signs... which isnt what youre doing. Do you not have a printer? You can print on white reflective vinyl...

    May 6, 2020

 


Loading...