• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by jbyrum

  1. Need Help Mini Bowling lane custom graphics

    I believe that it's something similar to HDPE or really hard plastic of some sort. I don't want to clear it in case I need to replace or decide to change themes again. I would prefer to have a laminated graphic if at all possible.
  2. Need Help Mini Bowling lane custom graphics

    Hello, I have 4 mini bowling lanes, 30"x28', and I would like to cover the old lanes with custom graphics but I'm worried about durability. I know they must be laminated but I don't know what would be durable enough to last being hit with 4lb balls. I was thinking that a sidewalk laminate would...
  3. Roland SC-545ex Service Manual

    I'm about to repair the rail bearing on mine and the service manual would be helpful, would you be willing to share it with me also?
  4. Need Help SC-545EX cutter rail bearing

    All, I have an SC-545EX that needs the rail bearing assembly replaced for the cutter head but I'm not having any luck finding parts without buying the complete rail assembly. Does anyone know of a source for these? Can anyone confirm that the 15mm balls in the original guide can be replaced?
  5. Replacing a Rail Bearing on a SC-545ex

    Sorry to revive and old thread but I also need the guide bearing for the cutter and I'm not having munch luck finding just the guide piece. Can I just replace the balls with 15mm bearings or does anyone have a good source for the part?
  6. ISO 48" mesh banner with PVC backer

    I am looking for a roll or two of 8oz mesh banner, 48" width. Not having any luck with my usual suppliers so I'm hoping that someone may have a roll or two laying around that they would sell or have a contact/supplier for a roll of this width. USCutter advertises an Ultraflex roll but they are...
  7. JV3-160SP media comp issues

    Sorry for the delay but I was on vacation until yesterday so I just got around to resolving this fully today. The issue was Flexi remaining in Demo mode. SAi finally had to set me up with a temp license today until we can sort out the licensing issue on Monday or Tuesday. Thanks everyone for you...
  8. JV3-160SP media comp issues

    On my Mutoh all the time using Flexi with no issues. (different version on a different PC).
  9. JV3-160SP media comp issues

    I did think of that but this is a full version. Where do I look to see if it's in Demo mode somehow?
  10. JV3-160SP media comp issues

    I've adjusted on the machine, it has no affect on these lines. I'm not sure that I know where the setting is in the RIP, I thought I had found it in the driver settings area but it also had no impact on the lines. Nothing that I have done has changed these lines at all.
  11. JV3-160SP media comp issues

    I uploaded the file yesterday when I posted but I guess it didn't make it, just uploaded again.
  12. JV3-160SP media comp issues

    All, I could use your help and expertise. I bought this printer about 6 weeks ago and it was performing normally when I picked it up. However, since I've installed it in my shop, I've not been able to print anything without lines every 1/4". Looks like media comp to me but no adjustment that...
  13. Rip & Cut (ARMS) software needed, I was duped.

    Thanks for the input Wayne but we buy these machines to make our lives easier and to streamline our workflow so if they don't work with our current toolset it only complicates things. Are there workarounds that I could do to make this work? Possibly. Do I want to? No. I was sold the unit with...
  14. Rip & Cut (ARMS) software needed, I was duped.

    I already had the FLexi DX with my Mutoh, had to upgrade to get the cutter functionality. Luckily though, I opted to do the 1 month subscription as a trial before buying FlexiPRINT. I did try to use the Saga 1350II driver, it will not register/ automatically find the bomb-sights. If I can't...
  15. Rip & Cut (ARMS) software needed, I was duped.

    Good day everyone! I'm looking for a good package that will Rip & Cut (contour). Mutoh VJ1204A US Cutter 53" Titan 3 (Saga 1350II) ARMS contour cutter I just purchased the cutter last week and the salesperson told me that FlexiSIGN Pro would manage my jobs and work with this cutter. After...
Top