Recent content by Jeremy W

Thanks for the tips, everyone. Part of the problem may be I don't have a take up reel - the business I'm at has sort of just swung from the hip for the last 7 years and doesn't really have all the tools to do business the right way, so I'm the first employee to come along and actually try to do...

I have what feels like a very simple issue that probably has an easy solution the veterans have figured out. Oftentimes rolls of certain types of media (particularly glitter and printable HTV) curls UPWARD when loaded on the machine, causing the print or cutting head to strike the paper on...

Hello! I am having an issue with Versaworks not overriding the SP-300i's cut pressure setting. I had the printer at 120 gsm and then went through several cuts changing the cutting conditions settings in Versaworks, incrementally increasing the pressure, none of which changed the actual cut...

Thank you folks. I replaced the top caps (and the squeegees while I was in there) and after a couple heavy cleanings I'm getting all four colors, nice and clear. Incidentally, the test you asked me to print I ran before and after - before there was black where blue should be.

Hello! I have many years of experience with printers/plotters and graphic designs, but I am relatively new to the large format printing of the Roland devices. At the shop I work at we are using a Roland SP-300i and today it started printing out the wrong colors for the first time - printing...