Welcome To Signs101.com: Largest Forum for Signmaking Professionals

Signs101.com: Largest Forum for Signmaking Professionals is the LARGEST online community & discussion forum for professional sign-makers and graphic designers.

 


  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Ratings Jester1167 has received

  1. WildWestDesigns rated Jester1167's post Agree in the thread Font choices....

    Before I started my own install only business, we had a banner hung in the back of the shops I worked in. I was as tall as we could...

    May 25, 2020 at 8:04 PM
  2. Pixels Are Bad Mmmkay? rated Jester1167's post Agree in the thread Need Help Identifying Font like Eurostile.

    I think it is Eurostile and the chrome effects with the beveled outline is making appear to curve out in the middle and shrink on the...

    May 23, 2020 at 11:53 PM
  3. Bly rated Jester1167's post Agree in the thread Liquid Laminate on Trailer Wrap.

    Most liquid lam graphics are cast and masked before installation because the material is so thin. You might get away with high end...

    Mar 29, 2020
  4. signage rated Jester1167's post Agree in the thread How to remove sunbaked factory decals?.

    There are easier ways to remove old cracked decals but they are extremely expensive such as a high-pressure steam sprayer. I do like...

    Mar 24, 2020
  5. signage rated Jester1167's post Agree in the thread Question Training to install Wraps.

    The training places mentioned above do a good job. The problem is you can only absorb and understand so much at one time. With 10 to 20...

    Mar 16, 2020
  6. signage rated Jester1167's post Agree in the thread Difficulty Adhering after Rapid Remover.

    Best scraper money can buy the Triumph 6" scraper. It will power through vinyl easier than the 4" hardware store version. Also, I...

    Mar 15, 2020
  7. signage rated Jester1167's post Agree in the thread Spray painting the edge of routed ACM before applying vinyl?.

    P.S The difference between the cost of cast vs. quality calendared vinyl is minor, especially compared to your labor or your reputation.

    Mar 13, 2020
  8. Stacey K rated Jester1167's post Agree in the thread Problems removing vinyl.

    It doesn't take much to remove the finish on old trailers. Adhesive removers seem to soak in and soften the thin layer of paint and when...

    Nov 4, 2019
  9. SightLine rated Jester1167's post Agree in the thread Looking for best adhesive remover.

    I am fully aware of xylene's properties and use chemical resistant gloves and only in a well ventilated area. I thought I heard it can...

    Jan 29, 2019
  10. mkmieciak rated Jester1167's post Agree in the thread Does anybody use flat pricing for their vehicle wraps?.

    Flat pricing doesn't make a lot of sense to me either. ikarasu posted good reasons above. My philosophy is to tell the client a range...

    Jan 4, 2019
  11. Jburns rated Jester1167's post Agree in the thread Suggestions Don't be like me....

    Safety rulers are great as long as your table is perfectly flat...

    Nov 20, 2018
  12. bannertime rated Jester1167's post Agree in the thread Suggestions Don't be like me....

    Safety rulers are great as long as your table is perfectly flat...

    Nov 20, 2018
  13. SoCal rated Jester1167's post Agree in the thread CorelDraw: Combine Tool.

    Reducing nodes can help too.

    Nov 19, 2018
  14. myront rated Jester1167's post Agree in the thread Poll / Question..Training your staff.. preferences.

    I have a different perspective. Outside experience is extremely valuable if you know your sending them to someone who knows what they...

    Nov 19, 2018
  15. Doug Allan rated Jester1167's post Agree in the thread Need Help Anybody know a good cut vinyl wholesaler?.

    No matter what, I think you would need a local source for the smaller one off jobs, or quit doing them all together. And what happens...

    Nov 10, 2018
  16. JR's rated Jester1167's post Agree in the thread Need Help Remove & Replace job... Vinyl won't come off.

    On glass, i will cut the vinyl into smaller strips in cooler weather. If that doesn't work, scrap it and then use adhesive remover and...

    Nov 10, 2018
  17. Pixels Are Bad Mmmkay? rated Jester1167's post Agree in the thread Pricing.

    Size, quantity and waste are factors too. Small banners don't use a lot of material but they do take the same number of steps. Those...

    Oct 29, 2018
  18. Grafix rated Jester1167's post Agree in the thread Need Help Need Help identifying this vinyl product.

    Looks to me like the original lettering was white printed on clear and cut to shape bigger than the print, then someone came along an...

    Oct 20, 2018
  19. 2B rated Jester1167's post Agree in the thread Need Help Need Help identifying this vinyl product.

    Looks to me like the original lettering was white printed on clear and cut to shape bigger than the print, then someone came along an...

    Oct 18, 2018
  20. IDB Signs rated Jester1167's post Agree in the thread Looking for a "good" X-Acto knife?.

    I used to be a fan of the x-acto with the #11 blade so much so that I had one of those on me at all times for detailed cuts and a...

    Oct 3, 2018

 


Loading...