• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Jonathan24212

  1. Trying to find a Small Laminator

    What do you mean by roll the backing off?
  2. Trying to find a Small Laminator

    When I was talking to Stahls' they explicitly said to use the medium mask (same with Roland people) as the high tack wouldn't release when pressing. I just bought a bunch of medium. Do you use high tack? Any problems with it?
  3. Trying to find a Small Laminator

    What about from eBay? I also need it to have a take up reel which limits me to available options Qomolangma 55in Full-auto Wide Format Cold Laminator...
  4. Trying to find a Small Laminator

    I actually have that one from amazon but here’s my problem. I have the pressure on so high that the handle doesn’t turn it and I roll the “top tube” by hand. I do that be because If it’s any lighter pressure then the media doesn’t want to release from the backing to the transfer mask. The...
  5. Flexi Changes to defualt printer settings

    Thanks so much! That solved it!
  6. Stahls Express Print HTV release problem

    Hi guys, I'm having some issues with my printed HTV. Once I weed the excess and put on the medium tack transfer mask when I go to pull it off sometimes pieces do not transfer. I have used a squeegee and I have also used a cold laminator to apply high pressure. What I don't understand is...
  7. Trying to find a Small Laminator

    Hi Guys :) I have a 54" printer but we do heat transfer material so we usually cut the material off at max 30" otherwise weeding the excess becomes too difficult. I'm trying to find a cold press laminator that will put the medium tack poly transfer mask on and apply even pressure (rather than...
  8. Flexi Changes to defualt printer settings

    Hi guys :) Just started using Flexi 19 and I am printing on a Roland Tru-Vis VG2. When going through versaworks I set the vacuum power to high. In Production Manager I selected my printer and went to the default job properties where I put in different settings (head hight medium, vacuum power...
Top