Recent content by JTpro

Our FC8000 63" model went down due to static shock, we had a 54" model as back up. Picked them both up used a few months ago. We quickly noticed that the 54" model wasn't cutting as well as the 63" model. The 54" would have rounded corners on some edges, but not others and not completing...

Making money one sign at a time

I'm also looking for the service manual for 350.... i cannot find them anywhere.... can you share?

I bought this printer new in April and as much as I'm impressed with the quality of the 8 color system and I'm disappointed with the ink consumption / usage of the printer to rasterlink. On three separate occasions I've had 30% or more of ink left and then it goes to zero before the job was...

Anyone know how to edit profiles in ONYX to make them only use CMYK head instead of CMYK and GeOrLcLm? I have a epson gs6000 with dual head. The GeOrLcLm head is in need of replacment, but the CMYK head is firing at 100%! I know there has to be a way to edit this. I haven't got a clue where to...

same issue second printer So we still get nothing when doing a test print from the machine, not a single drop of ink. We will do a cleaning and ink will come through the waste tube as well as the capping station has fresh ink on it.... but we get zero ink on the media when doing a nozzle check...

magenta does, but the others do not. I just picked up a second one for free last friday. I'm going to swap out the printhead board and then main board to see if it makes a difference. I feel like it's just not sending information to the head

Run a test print / nozzle check and getting zero on the media. Ran cleanings and also manually soaked to head at an attempt to removed any clogged / dried ink in the heads. We have taken apart the front of the right maintenance station to gain access to the pumps to see if their was a clog and...

I should have added: This was run on 8 pass Uni directional slow speed, head set to low. I've tried various settings 16 pass uni & bi, fast / slow etc... all with the same result. I did do one with rotating it 90 degrees and I got the same result. I'm not sure if my vacuum is on or off or...

Does anyone know why I'm getting these darker lines on the print (see attached image)? The image is a gradient from a light blue to an off blue. A friend of mine was getting the same result on his value jet 1204. I thought it was his printer, but it did the same / similar when I ran it. The...

I don't mind the sound, but I knew if I put that in there everyone would know what I was talking about!! I'll adjust the Logical seek accordingly. Thank you All!

I've looked through the manuals twice and can't seem to find this setting. I'm pretty sure it can be adjusted. Where is the setting to adjust the frequency of self head cleaning? It may not be called self head cleaning, but when the print heads go to the capping station while printing and...

Kent You were recommended to me to possibly be able to fix / repair my on board firewire controller for my Mimaki JV3-160S. The machine was up and running for 18 months and after I moved it to my new office, I've lost my firewire connection from PC to Printer. It does still run using a...

Thanks.... I'll contact him to get some pricing

I'm really at a loss!!! I've replaced the internal firewire card, cable and updated the driver for the printer! I'm still at a loss on why it won't print!!! I've been limping along using parallel cable which is extremely slooooooow!!! Is my last resort replacing the internal card on the...