I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Resolved this issue. The thermistor in the dryer was changed. Also plugged in one of the old printheads and it got a temp reading from the head at least.
The VP lives! Just to wait for new heads to come in and everything should be good to go hopefully. any advice on calibration that needs to be...
The Vp has powered on! We changed the fuses and a couple transistors.
We have a new error. Temperature too low. is that because no heads are installed?
Hi guys I got a VP 540 without heads or cable. I've got new ones coming in but I don't know how to connect them.
Can anyone give me a diagram of the carriage board and which cable goes to which head and which side?
My VP will not power on at all. I was not at the shop and I can't guarantee the accuracy of the report I was given.
I was told the black head cables got ink on them and were removed. The removal was somewhat careless... The cables were sorta stripped off the backing and the metal pins were...
I bought a used VP 540 but I didn't get the CD. is there anywhere we can download the software? I can't find it anywhere.
EDIT: I now see that we can buy a CD from Roland which is so dumb we have to wait for an actual physical CD to ship.... Anyone willing to make an ISO image of theirs and...
You are right! but for the purpose of the nozzle check and identifying which damper at fault it is accurate as indicated. I had a bad nozzle test on H as shown in the nozzle check. When I changed the F/H damper the problem was resolved.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.