I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
Okay so I have the same problem as the gentleman above. I've gone through two Roland xc540 machines replaced multiple print heads motherboards so on and so forth on the Roland. I've always liked the idea of an HP latex printer because of the instant drying. So I bought a brand new in-the-box...
Hi My name is Ben I have a small print shop with a Roland xc-540 setup to print CMYK Lc lm I would like to convert it to cmyk spot spot color for specialty printing I do. so that I could use speciality made spot colors. For example, home Depot orange cannot be printed with CMYK but speciality...
Yes, I agree but have subbed out 2500 worth of work in the last month I pay a local printer to print for me and am paying them 1.00 a sq ft now. I supply the material. So do I get the old HP printer ( do you think I could service the HP myself when they stop support)to fill the gap and stop...
Well, I don't know about you but this has been a rough year for me. I have an xc-540 that I've been using for about 6 years now, I know it quite well but the network card on it failed and required a motherboard replacement I replace the motherboard but to no avail, because I could not get it to...
Hi, Joe thank you for the reply I will try the power rest. but as for the other things I have done several times. As I said this is a brand new motherboard I have saved the parameters file from the old motherboard. The newer firmware or the motherboard parameters saved will not load because of...
Hello, My name is Ben I have been printing with my xc-540 for about ten years so I know the machine very well. I recently had my network card fail on my machine, and unfortunately, it is part of the motherboard. Luckily I was able to get a backup of the motherboard parameters and latest firmware...
Blowing F1 fuse FIXED
Ok UPDATE took out the head Board. Got a 21 Dollar Multimeter from HF meaterd the transistors The PNP 4131 and the NPN 1746 transistors. found bad PNP 4131 bad in #1 spot this also gave the other three (4131s) in the group an altered reading(not a bad reading). I set the...
I have searched the boards for something close to this but no luck.
I had a head go bad so I changed it.I got 1/2 a test print and group A (C M)stopped printing. OK went through all the next logical steps. pull head cables to M/C heads power up fuse blows. take head cable off fuse still blows...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.