I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
I would get 3m certified then wrap the vehicles with the cheapest non 3m material. The customer gets their $6 wrap. When it fails blame 3m. Its a win win. hahahaha.
You should negotiate a few free months in exchange for you doing all of the remodel yourself. If you can find a landlord that is hungry enough they will do it quickly and without issue. You could do a great remodel on that size space with a few grand.
It really depends on how your business is. If you can print the Roland Swatches and show it to the customer and they are ok with it you are fine. If a customer specs a PMS Burg 209 and you show them the Roland swatch and they aren't ok with it you may have problems getting the color to match...
If you give him a custom quote and a discount it can help him to know the appropriate selling amount.
When I sub out large run full color printing I get a 20% from the printer. I just mark it up 25% and I have a price that is competitive in our market. If you give him a wholesale price he...
I just got some marketing material from a paper vendor last week. It came in an envelope with an intro letter and a sheet that explained some of their options. I glanced through the pieces and tossed it.
This morning I got a call from the sales rep that sent the letter. Because I saw the...
As far as leasing vs loan you will get a much better rate getting a conventional loan than what you get in a lease. The leasing person will say its only 7%, but the payments are more like 15% in a conventional loan. It just comes down to what you qualify for. Getting a lease is much easier...
We run versaworks on a W7 box and I have had no problems with VW. I've had more OS problems, but I'm a Mac guy so I don't keep up on proper update procedures and stuff.
I called a tech and just travel is $300 + $1200 for a new head + $400 labor. I'm not against it, but I just want to make sure I've covered everything I can before they come out. If he doesn't bring the right parts I'm probably out at least another $500 so they can travel again.
I've tried pulling more ink and no improvement. When I print a mix of 30C 0M 0Y 25k I still get M and Y in the print. Is that a result of the bad cyan head or could that be a different issue?
When I had the head strikes a month ago the head was moving right to left so it hit the MY head not...
You can adjust the depth of the blade when you are cutting. I usually cut on scrap foamcore or something so I don't gouge the table.
It doesn't have any way to hold the rail down. I usually stick some small strips of masking tape on the back edge to hold it in place. I find that going down...
We use the Image Edge Cutting System which uses rails for the blade to go along. You get 4 30" rails that you can connect together. I use it a lot and it has helped improving my skills at cutting free hand with a ruler.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.