Recent content by marleyjoeb

This machine has less than 5 hrs on new print heads. We lost our biggest client a year ago and have hardly used the printer since. Operates perfect, comes with a laptop and versacamm software, mostly full 440 inks, a good amount of media, manuals etc etc....The printer originally came from bay...

Strange, though the Roland manuals does say after you make the settings adjustment if you run the test print again it will show the same results. It says you need to run your own file to see the adjustment. For me, no matter how I adjust, it makes no difference. SOunds like your is making a...

Hey guys, need a hand. My feed setting is far off, (see image)...Making all adjustments under print/cut alignment does nothing...I have cleaned encoder, tried all ideas in manual, it seems to make no effect on correcting cut...any ideas? PS, as you can see in the image, the scan setting is...

I lost my yellow...Upon cleaning in service mode I am seeing a stream of bubbles being sucked in to the damper from the ink side...- Do you think a damper replacement and a new o-ring will fix? joe

thanks large format...are you thinking that the limit sensor is in fact the "encoder strip sensor? my tech says they are different and they ordered me what is called a "limit sensor" which is 38.00 verses the encoder strip sensor which is 260.00 - he says they are different, i am trying to get...

nobody here has done a limit sensor huh? well, my tech assures me the limit sensor is different than the encoder strip, but they seem to be in the same location with no reference to a limit sensor on the sensor map...i will keep you posted..

has anyone replaced this on a roland sp300v or comparable printer? I have ordered one but on the senor map chart it looks just like the the encoder sensor in terms of location...There is no "limit sensor" on the sensor map in the roland service guide...please help - joe

has anyone here replaced the limit sensor...looking at the sensor map it in the guide book it looks to be in the same spot the encoder strip sensor is...any ideas?

after 1 month of not printing, new heads, new fuses...got the thing printing...have made 3 -4 prints. now constant service call code 0105 - checked all that the manual suggests...printhead and cut carriage and connection and disconnecting perfect, ran the limit initialize set up 10 times...

damn, just cant get it working, it is now worse, happens every time and cannot print...did limit initialize, cleaned encoder strip, cleaned sensor...adjusted lock switch...any other ideas?

finally, we have the sp300v printing beautifully, yet about 60 percent of the time we get the 0105 code.....not exactly sure how to check all that the manual references...this has all come about since replacing print heads and blowing tons of fuses....that prob is resolved...now this...PLEASE...

UPDATE! We are now able to print a test....sometimes....We did get it to do a perfect test print once and all 4 colors printed...Now a continuous service call 0105 error...check all that the manual suggested...no help....any ideas?

well, we are now printing Magenta only...Think the yellow line is still plugged and we blew the damn fuse for the cyan black head...This is a major bummer....

in doing the ink fill, i did as suggested filling cap stations with solution, run ink fill acts like it is pumping, moving back and forth yet the lines are not filling with ink...either the pump is not creating suction or there is an air lock in the line or ink cartridge...any ideas

Hi, so I have a versacamm sp330v, brand new heads and had all fuses and transistors replaced...Fuses continued to blow due to bad heads...New board is in, new heads are in...Not printing...Looking closer I see that there is no ink in the dampers or clear lines going to dampers and heads...Is...