• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by michaelj7

  1. Off Scale message - FC8600 & Flexi

    Well As of yesterday (which was day 5) Graphtec has not called back or answered their phone. Maybe it’s time to get a Summa! Shame is that my FC8600-160 is only 8 months old!
  2. Off Scale message - FC8600 & Flexi

    Well, here is an update. Flexi reinstalled everything, and said its not there problem. Graphtec said they messed up the drivers, updated firmware and reinstalled drivers. Not it works 1/2 way, it does not read registration marks, and just gives an error with registration. Back to Graphtec we go!
  3. Off Scale message - FC8600 & Flexi

    I have a Graphtec FC8600 and I am using Flexi 12. When I send a cut it gives the message OFF SCALE. Plotter just stops there. I have tried: Rebooting both computer and plotter (both several times) Different files, as simple as just plotting ABC. Deleting and reinstalling driver in Flexi manager...
  4. Valueless Cutting Error

    When I try to do a cut on the Valuejet 1624X Printer, It just scores the vinyl, and does not make the cut. Then comes up with a cutting error. I need to release and reset the vinyl to clear the error code. Does anyone have any idea of what I need to do to repair this. Just noticed, sorry...
  5. Graphtec CE300-60 Cable

    Hello, just got a graphtec ce3000-60. Didn't come with any other hardware or software. Just the plotter and stand. I a planning on using SignGo Pro. Does anyone know where and what kind of cable I would need to interface with my computer?
  6. Master Plotter XY300P Using SignGo Problems....

    Well, I took out the box around the lettering and tried using the weeding option. This sort of worked, When it was cutting the weed box it was slitting the paper, Then on the 4th try, it didn't lift the blade, but this wasn't too bad as the end of the box was next to home, and the blade...
  7. Master Plotter XY300P Using SignGo Problems....

    Is there any way to prevent these static attacks?
  8. Master Plotter XY300P Using SignGo Problems....

    Yes, but the WinPCsign that came with the plotter doesn't work with the later versions of windows. That is why the vendor (Desay of Canada) talked me into buying SignGo.
  9. Master Plotter XY300P Using SignGo Problems....

    I am using a Master Plotter XY300P. In the past I used the program that came with the plotter, I think it was PCSign. Then I purchased SignGo FD, because PC Sign wouldn't work with the anything after windows vista. I rarely used the plotter and didn't have too many issues. Now we started...
  10. SIgnGo V1.12 & Master XY 300 Cutter Problem?

    Is there a cure for this static problem. Could it be in the cable?
  11. SIgnGo V1.12 & Master XY 300 Cutter Problem?

    Doesn't seem to help same issues. Funny part is that it happens sporadically. However it averages to about 66% of the time it destroys the vinyl. Not doing a whole lot of cutting right now, so I really don't want to have to go for a couple thousand for another plotter. Is it possible to...
  12. SIgnGo V1.12 & Master XY 300 Cutter Problem?

    I am using SignGo V.1.12 with a Desay Master XY 300 Cutter/Plotter. When doing cuts, it sometimes goes nuts. Example I had a cutout that was 5" x 60". First cut went perfect. The second cut went half way and then the roller stopped turning and the cutting head went straight across the vinyl...
  13. Which blades do I need for Master Plotter?

    Anyone out there with any possible help???
  14. Which blades do I need for Master Plotter?

    I have a Master Plotter XY300P. Been using it for quite a while, (bought it way back) on and off. I finally need blades. Does anyone know what brand is compatible with this plotter? Where is a good source for blades?
Top