• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by MJerome

  1. Epson Support is TERRIBLE!

    You should run separations of C,M,Y,K,O,G,B and see if banding is occurring in certain colors or combination of colors. I know when I was using a S70 we had multiple cartridges of ink that ruined the print heads, might be one ink that’s the culprit. Could also be the ink not properly drying in...
  2. Another mid tone goes pink in the HP 315 and its eve of destruction, the advent of the 700.

    Sounds like the current printer profile you’re using is based on a material with a blue cast white point, causing magenta to be introduced to counteract the white point of the material used when the profile was created. Try a different printer profile, or bite the bullet and get a spectrometer...
  3. How do you keep consistent colours on roll to roll printer? (Epson SC80600)

    Get the X-rite i1iO pro3 the iO is the robotic arm and table. If you don’t get the robotic arm you have to manually read in the patches, plus you will naturally be rushed doing this and get bad readings.
  4. Need Help Hello, I" Looking to get some advice on what Acrylic brand, people are using to print direct on to.

    Paskolite Optix DA and Acrylite digital print . You could also try wiping the acrylic with a mild soapy water followed by some IPA. Another thing you could check is how you’re cutting, is the bit old etc. Last thing is chipping typically occurs when the ink is over cured making the ink become...
  5. New flatbed recommendations

    I wouldn’t recommend making a decision based on a virtual demonstration, you have to see the printer in person. Testing your own materials and QC all the prints to make sure it passes through all your processes. There’s a lot of companies that have buyers remorse from not doing their due...
  6. GS6000 and 16 pass

    Are you using a media profile you created yourself?
  7. strange banding

    Almost sounds like a feed issue, have you tried printing that file in Uni-direction?
  8. Epson S50670

    If your having trouble with different size panels try this. Menu media setup customize settings select the current settings your using. Feed adjustment manual 20in pattern Once printed measure the actual size and increase the value by the amount the length is off. We've had the Epson S70670...
  9. AGFA Anapurna M4F

    I have not worked on an Anapurna but I have a lot of experience on the Agfa Jeti HDC. While changing print heads once on our Jeti a fuse failed causing all the print heads connected to that board to not print at all. At first we thought it was the high voltage board but it just ended up being a fuse
  10. Ricoh Generation 4 print heads

    Hi we have numerous Ricoh Gen 4 print heads from our Jeti HDC, that were involved in a head strike. Does anyone know of a place that can repair the print heads? When flushing the heads all the Jets appear still there. It seems to be an electronic problem. Any ideas? Thanks, Mike
  11. Agfa Jeti 1224 HDC problems

    We did have the electrical and environment monitored for about two weeks, we did show some variation in frequency and voltage. They suggested that the feeder for the transformer was being overloaded ( transformer to small ) and other PFC events. We did also vary in temperature and humidity but...
  12. Agfa Jeti 1224 HDC problems

    Is anyone else having issues with Agfa Jeti's, we've had a 1224 HDC since July 2011 and have many issues most are minor that can be resolved by a simple restart. Our biggest problem is pixel board errors with PA1 always failing to read and write causing the Jeti not to print and having to...
Top