• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by mvp-graphics

  1. Can you upgrade your VG540 to the version 2???

    I am in need of the ORANGE and want to know if there is an upgrade i can do to the firmware and remove the unneeded extra MAGENTA and replace it with ORANGE. Please tell me they are working on an upgrade....
  2. VP-300 over spray

    Update.... I purchased a new print head. Problem NOT resolved but is waaay better. Not sure what to do now. As for the clogged head, it's perfect now, but as for the overspray, still there but minimal. I have replaced the dampers along with the head and cleaned the encoder strip again too...
  3. Need Help Roland Sp300v Overspray/head Clogged Issues

    Update.... I purchased a new print head. Problem NOT resolved but is waaay better. Not sure what to do now. As for the clogged head, it's perfect now, but as for the overspray, still there but minimal. I have replaced the dampers along with the head and cleaned the encoder strip again too...
  4. Need Help Roland Sp300v Overspray/head Clogged Issues

    To answer both of your questions, I have done the static test and other suggested methods to relieve the static and I still have the same overspray. As for the CYAN, yes, all my blue has overspray too. Especially the darker blues which involve more black. Not so much CYAN by itself.
  5. VP-300 over spray

    I'm having same issues. Where did you purchase your encoder strip?
  6. SP-300V Cut Carriage Cable replacement guide

    Sorry for the late reply. I thought I already did this. Issue fixed: It was Roland Versaworks....When I put the cut pressure in, it was not overriding the printers settings. I put cut pressure straight into the printer and it worked. WOW. $1200 later and all these new parts for a simple...
  7. SP-300v Cut pressure problems -HELP!

    Sorry for the late reply. I thought I already did this. Issue fixed: It was Roland Versaworks....When I put the cut pressure in, it was not overriding the printers settings. I put cut pressure straight into the printer and it worked. WOW. $1200 later and all these new parts for a simple...
  8. Need Help Roland Sp300v Overspray/head Clogged Issues

    Hello, New to the site. I'm a Rookie. Thanks for having me. Issues: I get overspray on my Black/Blue print head. I have done everything from flushes, soakings, manual cleanings, powerful cleanings, replacement of cap tops, dampers, wipers, blades, just about everything. I still get missfires on...
  9. Test Print

    Test Print

  10. Registration Mark Overspray

    Registration Mark Overspray

  11. CMYK Block Overspray

    CMYK Block Overspray

  12. MVP Graphics

    MVP Graphics

    Printer Issues
  13. SP-300v Cut pressure problems -HELP!

    I appreciate any info I can get. My problem exist somewhere. Basically, my cut pressure is going away. Where I use to cut htm2 vinyl at 50 grams, i'm now at 95 and when Im trying to cut 3 mil lamination, it barely cuts trough it. Then of course when I cut 11 mil and above for MX graphics, it...
  14. SP-300V Cut Carriage Cable replacement guide

    Thanks but a no go for me I appreciate the info as I replaced my carriage cable with ease by using the .pdf provided. Thanks. Unfortunately, my problem still exist somewhere. Basically, my cut pressure is going away. Where I use to cut htm2 vinyl at 50grams, i'm now at 95 and when Im trying...
Top