Recent content by Nicky Zhou

Yes definitely. Their eco solvent and solvent printer is good . Do you buy from dealer or directly from China

you can share printer electronics configuration or the specification of this printer, properly we can give you some advise

Thinking about the DTF & DTG for your business, the normal DTG printer which load a different ink can do both DTF and DTG. To convenience both Polyester related and Cotton. DTF for T shirt , small logo would be fine , large coverage is not a good idea. Since airtight. It is better to have DTG...

The A/B film rolls which needs the special feeding system, the rolls need to peel off the protection film before it go through the platform, yes you may thinking to use the ends pinch rolls, but think about how you can handling a continuous glue to the rollers , the stepping may blocked; even...

After reading the posts, I just have some different idea except the air pressure or ink starvation isssues on that.. In fact, we have been facing similiar issues before, we definite it as a banding issues related with Ink droping precision and ink spread on the substrates; The first dots drop...

on the EFI H1625, normally you won't facing the ink overflow issues even you shut down the power without close the valve, as that machine the negative pressure system was configured with a Big Air Tank in the bottom of the machine, which can stock some pressure for a period. Once you are...

If for large format UV flatbed , Roland just start a short time, and it was made under OEM, which Mimaki doing that products since a long time ago, It delivers better reliability and solutions. So i will suggest Mimaki. The Service is really depends on the technicals. But once the printer has...

Back to university for a better knowledge

I see most of the printer you are looking for choosing a Toshiba T-Tec heads, such as Oce, Fuji, EFI. All in all, if you really do a lot job on wood, in case your wood will be very good condition surface and clean at all. Or the T-Tec print head is not easy to maintenance when printing on wood...

Artbot. Part of them from Xenons, which belongs to YILIJET. But some of MT from other suppliers.

Hi Artbot. you should check the web: www.xenons.cn. The R180 was coming from that company. Not built by MT, MT just trade that products..

Which model of Arizona you are talking about? And to make a choice, it really depends on what your major business, or print substrates. For the first UV printer, I would like to choose a affordable printer, depends on how much you can pay, and how long you are planing to get back the...

The biggest advantage for Arizona is its printout color and density,as well as the stability of that printer, we can not say too much disadvantage for that printer, except the high cost of printer, inks, and the print head. The ultrasonic machine is a seperate machine which can used for...

All right, if you want to store some of the H700 spare parts, let me know if I can help.:smile:

Oh, Really, do you mean when you switch to 6 heads, the banding decreased or just ink density decreased?