I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes.
Click to Support Signs101 ...
We have the same machine, if UV light hasn't gotten to the heads, I doubt there will be a problem. There is a method to let the heads soak in the "Mimaki washing liquid" if there is a problem. I wouldn't worry if there is ink still in the lines as UV can't get to it. If they we're using white...
We have had the Mimaki JFX 200 2513 for I believe almost 5 years. It's a very good machine for the price. Print quality is very good even at it's fastest and lowest resolution. Service is going to depend on who is in your area. We have no problem with that. If you'd like you can call me, just...
Hi all, I am looking to purchase an HP 365 with the expectations of being able to do some 2 sided printing. At the moment we are doing it on our Mimaki flatbed which is working fine but it ties that machine up. I'd like to be able to run 50' to maybe 100' of vinyl blockout at a time and then...
I do like this. What kind of decorative molding are we talking about? Like an L shape? And the tubing, were they attached 1 by 1 to the wall or were they secured together?
Thanks
This is our first large outdoor sign. I want to make it look decent without spending too much, make it last and try to make it look professional. I'm thinking some kind of frame to get it away from the wall. I'm very new to this.
Looking for the proper way to install a 4' x 8' sign. It will be mounted to a cinder block wall. Using 1/8" Dibond or a similar aluminum composite substrate, is 1/8 thick enough? I'm concerned about expansion and contraction here in Pennsylvania. Also wind loading. Will normal standoffs around...
Hi all, Ran into is problem today. We are running a Mimaki flatbed UV printer. We are finding marks showing up in the image that are clearly from hands, not our hands. The sheets are coming straight out of sealed boxes. We have tried 2 different brands and they both have it. The image image has...
I was wondering if anyone else was having problems in RasterLink where certain customer supplied PDF's had artifacts appear in the printed piece? They are typically squares with lines going through them. They will not show up on the screen with any program nor will they cause a problem with any...
Just got back trying to get this to work. I traced out an outline of the flat box on a large sheet of paper and cut it out on the inside of the line. Then I masked off everything else. It ended up sucking down to the bed better than I ever thought it would. When I go to run the job I'll print...
Hello, I am looking for any advice on printing on a die cut flat box on our flatbed. It will have bleed so taping down is not a good option. Any thoughts on how to get it to lay flat? If i could find some larger sheets of some kind of mounting film with a temporary adhesive on 1 side that may...
My understand was that a lot of normal materials will curl after using the banner a few times. Maybe this is not the case? I do want to avoid that though.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.