• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Ramsey_Wraps

  1. Roland SP-540V Horizontal Banding Issue

    Ok finally back up and printing but I’m still having the same issue with the magenta dropping out at the left side of the print? Replaced dampers, wipers, scraper and no luck? Anyone know what I should try next?
  2. Roland SP-540V Horizontal Banding Issue

    No it’s installed correctly, it swings allowing the wipers to go in, but it binds up trying to come back out...
  3. Roland SP-540V Horizontal Banding Issue

    Installed new manifold on print head and noticed the wiper scraper was trashed so I replaced it, but the new scraper was black and not clear like the old one. Tried it anyways, but the wipers can't move past the scraper. Is this the wrong scraper or has anyone else had this same issue?
  4. Roland SP-540V Horizontal Banding Issue

    Yea it broke... i found a print head manifold on amazon, has anyone replaced one before or had any luck in just replacing the plastic part instead of the entire printhead?
  5. Roland SP-540V Horizontal Banding Issue

    Replaced dampers, caps, wipers... now my yellow completely dropped out... ?
  6. Roland SP-540V Horizontal Banding Issue

    Why even post if your going to just be rude.
  7. Roland SP-540V Horizontal Banding Issue

    hmmm... any ideas? should I just replace the magenta damper? I got to figure out why the magenta drops out....
  8. Roland SP-540V Horizontal Banding Issue

    OK friends, check these pics out..right side printed first, then i took same image and printed it to the left of the first image. magenta is dropping out but it looks like its a distance from the home position that is making the magnets drop out maybe starving of ink? whats my next move replace...
  9. Roland SP-540V Horizontal Banding Issue

    Anything else anyone can think of that might help?
  10. Roland SP-540V Horizontal Banding Issue

    ok here is my fill test print..
  11. service manual sp540i

    Can someone please send me a manual to Sp540V? & Thank You!
  12. Roland SP-540V Horizontal Banding Issue

    Fill Test... Can you give me a little more on what that is? lol, I'm ordering cap tops and dampers... got the wipers. Thanks for all your help.
  13. Roland SP-540V Horizontal Banding Issue

    OK still having issue. I replaced wipers, flushed out the caps and lines but it still is banding and colors changes from left to right see attached pictures, you'll notice the first and last snake are different. But it is the same file just 4 copies of it. About to lose my mind with this...
  14. Roland SP-540V Horizontal Banding Issue

    I have a Roland SP-540v and I can not get it to print right. I have attached pictures of the issue and test prints for calibration. Have done all the regular maintenance but nothing seems to help. The Bidirectional adjust print drops out the magenta row so bad I can't tell how to adjust it...
Top