• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Lunar Graphix

  1. Discussion I've owned an HP R1000 since April 2019, ask me anything

    You need very precise settings for ACM. Check the attached PDF
  2. KS R5070L - Runs Great - Located in Lawrence, KS | $14,000

    We are selling our R5070L at our shop in KS. Great machine, prints better than the HP 570 we had prior, especially on finer / small text and images. Selling because we are upgrading to a larger machine. We are the original owners, purchased brand new in Jan 2022. Printer is out of warranty, but...
  3. R5070L Glazing on prints

    We had a similar problem. Drips of what felt like like optimizer. Seemed like condensation somewhere but we could never find where it was coming from. Tech wouldn't confirm the cause, but he recommended we buy a a "media spacer". It's part EPSC12C937271, $197 from grimco. We installed it and it...
  4. Discussion I've owned an HP R1000 since April 2019, ask me anything

    try increasing your Optimizer level to 10 or 15%
  5. Discussion I've owned an HP R1000 since April 2019, ask me anything

    Hey guys, I'm back again with a update. Would anyone be interested in purchasing an R2000 that was in a print shop that was briefly on fire? I'll be making a post in the classified section soon. Waiting on my premium membership to be approved. I'll link it in this post when it's live. If...
  6. summa F1612 vacuum not turning off during belt advance

    fixed it. there was a blown fuse.
  7. summa F1612 vacuum not turning off during belt advance

    I also just tried restoring axis control to a previously known working backup from the last time we had the machine serviced and that did not solve the issue. The backup was essentially a copy of what we have been using since last february without issue. I do think windows updated itself...
  8. summa F1612 vacuum not turning off during belt advance

    Have not updated anything recently. We were in the middle of a 1000 sheet job when it started happening. Axis control firmware 9974.037 build mar 29 2021 It seems like the vacuum isn't shutting off in time, but I can't be certain that's the issue. Checked our airlines and they look fine...
  9. summa F1612 vacuum not turning off during belt advance

    Our f1612 will not advance media. Normally, while cutting 4x8' sheets, it goes like this: summa cuts a bit, vacuum powers down, carriage moves to rear, carriage grabs sheet/belt and moves to front pulling sheet and belt with it. Instead, summa is doing this: summa cuts a bit, carriage moves to...
  10. mimaki ujf 3042 work high 505

    We had a tech come out, problem was our mirror. Swapped it and he also did the 10mm block levelling procedure and we no longer have the work high error. However now we have washed out colors :)
  11. mimaki ujf 3042 work high 505

    did you ever figure this out? i'm having the same issue
  12. Discussion I've owned an HP R1000 since April 2019, ask me anything

    Unfortunately because of the high temp curing process styrene is a real mother to print. The largest size sheet we can consistently print without head crashes from warped material is 28x40". We will instead offer customers rollup banner material or PVC vinyl sheets, both great alternatives.
  13. Discussion I've owned an HP R1000 since April 2019, ask me anything

    Hi guys Just wanted to report in as I don't check the forums too often. I started this thread several years ago to document my findings and knowledge on what was, at the time, a newer technology without much in the way of online resources. The HP knowledge center now has a lot of what you'll...
  14. $18,500 - Afinia L801 Digital Label Printer & DLF-140S Finisher (Commercial Laminator/cut) - Located in Kansas

    We are the original owners. Purchased new in July 2021. MSRP of the machines was $23,845. Would like to sell combined but will entertain offers if you want just the printer or just the finisher. Lightly used. Printed approximately 125,000". Will likely need a new printhead on it, previous head...
  15. Discussion I've owned an HP R1000 since April 2019, ask me anything

    Yeah they are precut 3.5" heavyweight pulp coasters. We get them from Katz America for $0.0257 a piece plus another 0.02 ea for ship. We use 3 men to run them, 2 to load the sleds 1 to unload and re-box for ship. Running on a 4pass we can do 15,000 in about 7 hours. Drop the curing heat way...
Top