• I want to thank all the members that have upgraded your accounts. I truly appreciate your support of the site monetarily. Supporting the site keeps this site up and running as a lot of work daily goes on behind the scenes. Click to Support Signs101 ...

Recent content by Sebastion

  1. Need Help Overriding Errors on Designjet l26500?

    We found someone to soder things together and using copper wire and everything is fixed! Thank you!
  2. Need Help Overriding Errors on Designjet l26500?

    We don't have a back panel that opens up to it, it's a cable with four prongs that is external and connects to an internal motherboard where it is permanently fixed onto a sensor that would be very expensive to mess with. The part that is broken though is the external part of the cord and the...
  3. Need Help Overriding Errors on Designjet l26500?

    We brought over an electrician and he had no idea what to do or what he was looking at unfortunately we wouldn't be skilled enough to do that :/
  4. Need Help Overriding Errors on Designjet l26500?

    So the waste management cable broke in the back of the printer (the metal connectors snapped off one another and one piece lost), and the cost is about $500 to replace and we are getting a new printer in like a week :/ the censor isn't necessary, is there anyway to get around that error message...
  5. Need Help I Can't Understand Why My Summa is Cutting Half Circles

    Hi there! I have an issue with my Onyx RIP software and my Summa S160 D series plotter in that when I use Flex Cut and set my settings to a variety of numbers (currently Full Pressure: 350 Cut Length: 154 Flex Pressure: 350 Flex Length: 39) it cuts circles first with half circles and then ticks...
  6. Need Help Postershop Cut Server Missing Lines

    Hello, when I RIP graphics in Onyx and then print them and then go to contour cut them the weed boxes aren't always complete, some lines of the box are missing. This is completely random and each one has a printed box with a contour cut line on it but it seems to disappear once it gets into the...
  7. Need Help Summa Cutter is Cutting 1/16 Off Contour Cut Line

    Issue has been resolved! Thank you
  8. Need Help Summa Cutter is Cutting 1/16 Off Contour Cut Line

    I don't think we have ever replaced the pinch rollers, I doubt any of us in the shop I work in would know how to. I'm not sure how to run tracking tests besides a media calibration and no we haven't had this much difficulty with the material, we only ever cut one kind on our plotter.
  9. Need Help Summa Cutter is Cutting 1/16 Off Contour Cut Line

    I ran it two times and it followed the edges fine. With what I am cutting now it is the consistent amount off but what I was cutting yesterday it was getting progressively worse as it went through the cutter and the graphic was twice the size of what I was cutting today (about 70 inches long). I...
  10. Need Help Summa Cutter is Cutting 1/16 Off Contour Cut Line

    I have already tried this option and it didn't seem to fix anything, thank you though :)
  11. Need Help Summa Cutter is Cutting 1/16 Off Contour Cut Line

    Hello! I have been having immense difficulty with the tracking on my Summa S160 D series plotter constantly cutting my contour cuts lines slightly to the left about 1/16 of an inch which is a big issue for what I am cutting. When I try to do a media alignment the camera goes way to far to the...
  12. Need Help Help! Project doesn't send to Flatbed after Onyx RIP

    Hello there, I am currently having issues with sending projects to my Scitex FB 500 Flatbed from my Onyx Postershop software. Everything is connected just fine and I haven't changed any settings but after the project rips on the Onyx software and I hit "Print Now" it doesn't show up in the...
  13. Black Colors on Flatbed Turning Out Greenish

    I have tried CMYK 50, 60, 60, 100 and CYMK 100, 100, 100, 100 and I've changed different settings and did Pantone blacks as well but it always turns out the same
  14. Black Colors on Flatbed Turning Out Greenish

    I am working with an Scitex FB 500 and using Flexi as the software for the making the graphics and PosterShop Rip to manage the files and send them. Every time I print black on the flatbed printer it turns out green and I have tried everything under the sun to get it to be a nice, rich black...
  15. Sebastion

    I work for a local Signarama as a print tech.

    I work for a local Signarama as a print tech.
Top